AS/NZS 2350.1:2006-波特兰水泥、混合水泥和砌筑水泥的试验方法方法1:取样-国家数字标准馆

现行 AS/NZS 2350.1:2006

到馆阅读

收藏跟踪

购买正版

Methods of testing portland, blended and masonry cements, Method 1: Sampling 波特兰水泥、混合水泥和砌筑水泥的试验方法方法1:取样

发布日期： 2006-12-29

描述了在交付前、交付期间或交付后对代表给定批次的水泥进行取样以评估产品质量的方法和规定。

Describes methods and provisions to be complied with for taking samples of cement representative of given lots for testing to assess the quality of products prior to, during or after delivery.

分类信息

发布单位或类别：澳大利亚-澳大利亚/新西兰标准

关联关系

研制信息

相似标准/计划/法规

AS/NZS 2350.17-2006

Methods of testing portland, blended and masonry cements, Method 17: Determination of soundness of masonry cement
硅酸盐水泥、混合水泥和砌筑水泥的试验方法方法17:砌筑水泥坚固性的测定

Methods of testing portland, blended and masonry cements, Method 7: Determination of temperature rise during hydration of portland and blended cements
硅酸盐水泥、混合水泥和砌筑水泥的试验方法方法7:硅酸盐水泥和混合水泥水化过程中温升的测定

AS/NZS 2350.18-2006

Methods of testing portland, blended and masonry cements, Method 18: Determination of water retention of masonry cement
硅酸盐水泥、混合水泥和砌筑水泥的试验方法方法18:砌筑水泥保水性的测定

AS/NZS 2350.16-2006

Methods of testing portland, blended and masonry cements, Method 16: Determination of air content of masonry cement
硅酸盐水泥、混合水泥和砌筑水泥的试验方法方法16:砌筑水泥中空气含量的测定

AS/NZS 2350.11-2006

Methods of testing portland, blended and masonry cements, Method 11: Compressive strength
波特兰水泥、混合水泥和砌筑水泥的试验方法方法11:抗压强度

AS/NZS 2350.3-2006

Methods of testing portland, blended and masonry cements, Method 3: Normal consistency
波特兰水泥、混合水泥和砌筑水泥的试验方法方法3:标准稠度

Methods of testing portland, blended and masonry cements, Method 2: Chemical composition
波特兰水泥、混合水泥和砌筑水泥的试验方法方法2:化学成分

AS/NZS 2350.4-2006

Methods of testing portland, blended and masonry cements, Method 4: Setting time
波特兰水泥、混合水泥和砌筑水泥的试验方法方法4:凝结时间

AS/NZS 2350.5-2006

Methods of testing portland, blended and masonry cements, Method 5: Determination of soundness
波特兰水泥、混合水泥和砌筑水泥的试验方法方法5:坚固性测定

AS 2350.10-2006

Methods of testing portland, blended and masonry cements, Method 10: Acid soluble calcium oxide content of blended cement
硅酸盐水泥、混合水泥和砌筑水泥的试验方法方法10:混合水泥的酸溶性氧化钙含量

AS 2350.13-2006

Methods of testing portland, blended and masonry cements, Method 13: Determination of drying shrinkage of cement mortars
波特兰水泥、混合水泥和砌筑水泥的试验方法方法13:水泥砂浆干缩的测定

AS/NZS 2350.8-2006

Methods of testing portland, blended and masonry cements, Method 8: Fineness index by air permeability method
硅酸盐水泥、混合水泥和砌筑水泥的试验方法方法8:用透气性法测定细度指数

AS 2350.14-2006

Methods of testing portland, blended and masonry cements, Method 14: Length change of cement mortars exposed to sulfate solution
硅酸盐水泥、混合水泥和砌筑水泥的试验方法方法14:暴露在硫酸盐溶液中的水泥砂浆的长度变化

AS 2350.12-2006

Methods of testing portland, blended and masonry cements, Method 12: Preparation of a standard mortar and moulding of specimens
波特兰水泥、混合水泥和砌筑水泥的试验方法方法12:标准砂浆的制备和试样的成型

Methods of testing portland, blended and masonry cements, Method 9: Determination of residue on the 45 m sieve
硅酸盐水泥、混合水泥和砌筑水泥的试验方法方法9:测定45m筛上的残留物

AS 2350.15-1995

Methods of testing portland and blended cements, Method 15: Water-soluble chromate content of portland cement
硅酸盐水泥和混合水泥的试验方法方法15:硅酸盐水泥的水溶性铬酸盐含量

AS/NZS 2350.0-1999

Methods of testing portland and blended cements, Part 0: General introduction and list of methods
硅酸盐水泥和混合水泥的试验方法第0部分:概述和方法清单

Standard Test Method for Determination of Pack-Set Index of Portland and Blended Hydraulic Cements
硅酸盐水泥和混合水硬性水泥包固指数测定的标准试验方法

Methods of test for supplementary cementitious materials for use with portland and blended cement, Method 1: Determination of fineness by the 45 micrometre sieve
硅酸盐水泥和混合水泥用辅助胶凝材料的试验方法方法1:用45微米筛测定细度

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统