BS ISO 11525-4:2016与ISO 11525-1或ISO 11525-2一起使用时，定义了特定的 与使用非回转和回转可变行程卡车有关的用户要求 自由悬挂的货物。当ISO 11525本部分的规定与ISO 11525-1或 ISO 11525-2，ISO 11525本部分的规定优先于ISO 11525-1的规定 或ISO 11525-2。旨在实现以下目标:防止人身伤害、财产损失和事故；制定检查、维护、操作和培训标准。 注:国家或地方要求可以适用，以更严格的为准。ISO 11525-1给出了非回转可变行程卡车的一般用户要求。ISO 11525-2给出了回转可变行程卡车的一般用户要求。ISO 11525的本部分不适用于ISO 21898中定义的柔性中间散装集装箱。交叉引用:ISO 10896-4ISO 11525-1:2012ISO 11525-2:2015ISO 16715ISO 18479-2ISO 21898购买本文件时提供的所有当前修订版均包含在购买本文件中。

BS ISO 11525-4:2016, when used in conjunction with ISO 11525-1 or ISO 11525-2, defines specific user requirements relating to the use of non-slewing and slewing variable-reach trucks operating with freely suspended loads.When provisions of this part of ISO 11525 are different from those which are stated in ISO 11525-1 or ISO 11525-2, the provisions of this part of ISO 11525 take precedence over the provisions of ISO 11525-1 or ISO 11525-2.It is intended to achieve the following:prevention of personal injuries, property damage and accidents;establishment of criteria for inspection, maintenance, operation and training.NOTE National or local requirements can apply, whichever could be more stringent.General user requirements for non-slewing variable-reach trucks are given in ISO 11525-1.General user requirements for slewing variable-reach trucks are given in ISO 11525-2.This part of ISO 11525 is not applicable to flexible intermediate bulk containers as defined in ISO 21898.Cross References:ISO 10896-4ISO 11525-1:2012ISO 11525-2:2015ISO 16715ISO 18479-2ISO 21898All current amendments available at time of purchase are included with the purchase of this document.