BS EN 1994-1-1:2004适用于建筑和土木工程的组合结构和构件的设计 工程部。它符合安全性和可维护性的原则和要求 结构的设计和验证依据见EN 1990基础 结构设计。BS EN 1994-1-1:2004仅涉及阻力、适用性、耐久性和防火要求 复合材料结构的阻力。其他要求，例如关于隔热或隔音的要求， 不被考虑。BS EN 1994-1-1:2004拟与EN 1990欧洲规范:结构设计基础EN 1991欧洲规范1:结构作用结合使用 与复合结构相关的建筑产品ENs、hENs、ETAG和ETA SEN 1090钢结构和铝结构施工SEN 13670混凝土结构施工SEN 1992欧洲规范2:混凝土结构设计SEN 1993欧洲规范3: 钢结构设计SEN 1997欧洲规范7:岩土工程设计EN 1998欧洲规范8:组合结构抗震设计 内置地震区。BS EN 1994-1-1:2004分为多个部分: 第1-1部分:一般规则和建筑规则第1-2部分:结构防火设计第2部分:桥梁。BS EN 1994-1-1:2004第1-1部分给出了组合结构设计的一般依据，以及 建筑物的具体规则。第1-1部分:第1节:概述第2节:设计基础第3节:材料第4节:耐久性第5节:结构分析第6节:极限状态第7节:正常使用极限状态第8节:建筑框架中的组合接头第9节:建筑用压型钢板组合板交叉参考:EN 1090-2EN 1990:2002EN1992-1-1EN 1993-1-1EN 1993-1-3EN 1993-1-5EN 1993-1-8EN 1993- 1-9EN 10025-1:2002EN 10025-2:2002EN 10025-3:2002EN 10025-4:2002EN 10025-5:2002EN 10025-6:2002EN 10147:2000EN 10149-2:1995EN 10149-3:1995

BS EN 1994-1-1:2004 applies to the design of composite structures and members for buildings and civil engineering works. It complies with the principles and requirements for the safety and serviceability of structures, the basis of their design and verification that are given in EN 1990-Basis of structural design.BS EN 1994-1-1:2004 is concerned only with requirements for resistance, serviceability, durability and fire resistance of composite structures. Other requirements, e.g. concerning thermal or sound insulation, are not considered.BS EN 1994-1-1:2004 is intended to be used in conjunction with:EN 1990 Eurocode: Basis of structural designEN 1991 Eurocode 1: Actions on structures ENs, hENs, ETAGs and ETAs for construction products relevant for composite structuresEN 1090 Execution of steel structures and aluminium structuresEN 13670 Execution of concrete structuresEN 1992 Eurocode 2: Design of concrete structuresEN 1993 Eurocode 3: Design of steel structuresEN 1997 Eurocode 7: Geotechnical designEN 1998 Eurocode 8: Design of structures for earthquake resistance, when composite structures are built in seismic regions.BS EN 1994-1-1:2004 is subdivided in various parts: Part 1-1: General rules and rules for buildingsPart 1-2: Structural fire designPart 2: Bridges.Part 1-1 of BS EN 1994-1-1:2004 gives a general basis for the design of composite structures together with specific rules for buildings.The following subjects are dealt with in Part 1-1:Section 1: GeneralSection 2: Basis of designSection 3: MaterialsSection 4: DurabilitySection 5: Structural analysisSection 6: Ultimate limit statesSection 7: Serviceability limit statesSection 8: Composite joints in frames for buildingsSection 9: Composite slabs with profiled steel sheeting for buildingsCross References:EN 1090-2EN 1990:2002EN 1992-1-1EN 1993-1-1EN 1993-1-3EN 1993-1-5EN 1993-1-8EN 1993-1-9EN 10025-1:2002EN 10025-2:2002EN 10025-3:2002EN 10025-4:2002EN 10025-5:2002EN 10025-6:2002EN 10147:2000EN 10149-2:1995EN 10149-3:1995