本文件规定了将用于预制混凝土基础桩，工厂生产的建筑和土木工程的术语，要求，基本性能标准，试验方法和一致性评估，并通过使用冲击，振动，压制安装在现场或其它合适的技术。本文件也适用于按照第6条规定控制生产的现场临时厂房生产的产品，并在必要时受到不利天气条件的保护。 本文件适用于作为加固或预应力混凝土构件在工厂生产的基础桩。横截面可以是实心的或设置有中空的芯，棱柱形或圆柱形。横截面在整个长度上可以是恒定的，或者部分或全部沿桩或桩段长度变化。 本文件涉及一次制造的基础桩或具有铸造桩接头的基础桩。基础桩可以具有放大的脚趾或绒头鞋。 本文件适用于EN 206-1中定义的正常重量混凝土，压实，以保持除夹带空气之外的明显量的夹带空气

This document specifies the terminology, requirements, basic performance criteria, test methods and evaluation of conformity that will be applied to precast concrete foundation piles, factory produced for building and civil engineering works and installed at the site by the use of impact, vibration, pressing or other suitable techniques. This document may also be applied to products manufactured in temporary plants on site where production is controlled in accordance with the provisions of Clause 6 and is protected against adverse weather conditions as necessary. This document applies to foundation piles produced in a plant as reinforced or prestressed concrete elements. The cross-section may be solid or provided with a hollow core, either prismatic or cylindrical. The cross-section may be constant over the full length or tapered partly or wholly along the pile or pile segment length. This document deals with foundation piles manufactured either in one length or in segments with cast-in pile joints. The foundation piles may have an enlarged toe or a pile shoe. This document applies to normal weight concrete as defined in EN 206-1 compacted so as to retain no appreciable amount of entrapped air other than entrained air.