本欧洲标准规定了热环境，室内空气质量，照明和声学的室内环境参数要求，并规定了建立系统设计和能源性能计算的参数。 本欧洲标准包括局部热不适因素，吃水，辐射温度不对称，垂直气温差和地板表面温度的设计标准。 本标准适用于室内环境标准由人员占用以及生产或过程对室内环境影响不大的情况。 本欧洲标准还规定了用于标准能量计算的占用时间表，以及如何使用不同类别的室内环境标准。 本欧洲标准的标准也可用于国家计算方法。本标准根据现行标准和标准参考文献或参考书目中列出的报告制定室内环境标准。 本欧洲标准没有规定设计方法，但为建筑信封，供暖，制冷，通风和照明的设计提供了输入参数。 表1显示了该标准的相对位置

This document specifies requirements for indoor environmental parameters for thermal environment, indoor air quality, lighting and acoustics and specifies how to establish these parameters for building system design and energy performance calculations. This European Standard includes design criteria for the local thermal discomfort factors, draught, radiant temperature asymmetry, vertical air temperature differences and floor surface temperature. This European Standard is applicable where the criteria for indoor environment are set by human occupancy and where the production or process does not have a major impact on indoor environment. This European Standard also specifies occupancy schedules to be used in standard energy calculations and how different categories of criteria for the indoor environment can be used. The criteria in this European Standard can also be used in national calculation methods. This standard sets criteria for the indoor environment based on existing standards and reports listed under normative references or in the bibliography. This European Standard does not specify design methods, but gives input parameters to the design of building envelope, heating, cooling, ventilation and lighting. Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000 1. NOTE 1 In CEN ISO/TR 52000 2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation. NOTE 2 The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2 and Tables A.1 and B.1.