BS 8597:2015规定了钢的要求和试验方法 用于机械连接的钢筋耦合器（以下简称耦合器） 钢筋的拼接。它规定了需要安装的耦合器的要求 用于钢筋混凝土结构的机械拼接 主要是静态负载和对所用耦合器的附加要求 在承受高周弹性疲劳荷载的结构构件中。它也 规定了耦合器一致性评估的要求。本英国标准未规定需要安装的耦合器的要求 用于低周期钢筋混凝土结构中的机械拼接 在弹塑性范围内加载。 本英国标准规定了耦合器的性能要求。这个 耦合器作为两段电缆之间机械拼接的一部分进行测试 钢筋，根据BS 4449或BS 6744制造。这个 因此，规定的性能试验适用于包含 正在评估的连接器。本标准的要求适用于 耦合器的制造，而非机械连接器的组装或安装 现场拼接。注:耦合器的组装或安装说明可从制造商处获得。交叉引用:BS 4449BS EN ISO 7500-1BS EN ISO 9513:2012BS EN ISO 15630-1:2010BS ISO 16020BS 6744:2001+A2:2009BS EN 1992-1-1:2004购买本文件时可获得的所有当前修订均包含在购买本文件中。

BS 8597:2015 specifies requirements and test methods for steel reinforcement couplers (hereafter called couplers) to be used for the mechanical splicing of steel reinforcing bars. It specifies requirements for couplers to be used for mechanical splices in reinforced concrete structures under predominantly static loads and additional requirements for couplers to be used in elements of structures subject to high cycle elastic fatigue loading. It also specifies requirements for the evaluation of conformity of couplers.This British Standard does not specify requirements for couplers which are to be used for mechanical splices in reinforced concrete structures subject to low cycle loading in the elastic-plastic range.This British Standard specifies performance requirements for couplers. The couplers are tested as part of a mechanical splice between two lengths of reinforcing steel, manufactured in accordance with BS 4449 or BS 6744. The performance tests specified are therefore for mechanical splices incorporating the coupler being assessed. The requirements of this standard apply to the manufacture of couplers and not the assembly or installation of mechanical splices on site.NOTE Instructions for assembly or installation of couplers can be obtained from the manufacturer.Cross References:BS 4449BS EN ISO 7500-1BS EN ISO 9513:2012BS EN ISO 15630-1:2010BS ISO 16020BS 6744:2001+A2:2009BS EN 1992-1-1:2004All current amendments available at time of purchase are included with the purchase of this document.