1.1 这些表格列出了成年女性身材娇小型00P至20P的尺码。尽管这些都是身体尺寸，但在考虑面料类型、身体运动方便性、造型和合身度等因素时，它们可以作为设计该尺码范围内的Petite女士服装的基准。 1.2 这些表格列出了所有尺寸偏小的尺码的尺码。 1.3 以国际单位制或英寸磅单位表示的数值应单独视为标准。每个系统中规定的值不一定是完全相等的；因此，为了确保符合标准，每个系统应独立使用，并且两个系统的值不得合并。 1.4 本标准并非旨在解决与其使用相关的所有安全问题（如有）。 本标准的使用者有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。 ====意义和用途====== 4.1 身体测量信息在 表1和 2. 将协助制造商开发符合感兴趣人群当前人体测量特征的图案和服装。 这种做法反过来应减少或尽量减少消费者对服装尺码的困惑和不满。（另请参阅ISO 3635尺寸指定程序。） 4.2 Alvanon，Inc.创建了描述Misses Petite尺寸和子类别Curvy和Straight的三维化身，并将其纳入本标准，以帮助制造商可视化随附表格中测量图表生成的姿势、形状和比例 5. （《阿凡达》1-6）（参见 图1和 2. )。 图1 Missy Petite化身曲线 图2 Missy Petite阿凡达直筒

1.1 These tables list body measurements of adult female misses petite figure type sizes 00P through 20P. Although these are body measurements, they can be used as a baseline in designing apparel for Misses Petite in this size range when considering such factors as fabric type, ease for body movement, styling, and fit. 1.2 These tables list body measurements for the complete range of misses petite sizing. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 The use of the body measurement information in Tables 1 and 2 will assist manufacturers in developing patterns and garments that are consistent with the current anthropometric characteristics of the population of interest. This practice should in turn reduce or minimize consumer confusion and dissatisfaction related to apparel sizing. (Also refer to ISO 3635 Size Designation Procedures.) 4.2 Three-dimensional avatars depicting each of the Misses Petite sizes and sub categories Curvy and Straight on certain measures were created by Alvanon, Inc. and included in this standard to assist manufacturers in visualizing the posture, shape, and proportions generated by the measurements charts in the accompanying Tables 5 (Avatar 1-6) (see Figs. 1 and 2 ). FIG. 1 Missy Petite Avatar Curvy FIG. 2 Missy Petite Avatar Straight