1.1 本规范涵盖了一组一般要求，除非采购订单或单独规范中另有规定，否则这些要求应适用于轧制镍和镍合金板材、薄板和带材，符合ASTM发布的以下各项规范:规范 B127 , B162 , B168 , B333 , B409 , B424 , B434 , B435 , B443 , B463 , B536 , B575 , B582 , B599 , B620 , B625 , B670 , B688 , B709 , B718 , B755 , B814 , B818 , B872 . 1.2 如有任何冲突要求，应以采购订单、单项材料规范和本通用规范的要求为准。 1.3 以英寸-磅单位表示的数值应视为标准值。 括号中给出的值是国际单位制的数学转换，仅供参考，不被视为标准。 1.4 本标准并不旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任熟悉所有危险，包括制造商提供的本产品/材料的适当安全数据表（SDS）中确定的危险，建立适当的安全、健康和环境实践，并在使用前确定监管限制的适用性。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。

1.1 This specification covers a group of general requirements that, unless otherwise specified in the purchase order or in an individual specification, shall apply to rolled nickel and nickel alloy plate, sheet, and strip, under each of the following specifications issued by ASTM: Specifications B127 , B162 , B168 , B333 , B409 , B424 , B434 , B435 , B443 , B463 , B536 , B575 , B582 , B599 , B620 , B625 , B670 , B688 , B709 , B718 , B755 , B814 , B818 , B872 . 1.2 In case of any conflicting requirements, the requirements of the purchase order, the individual material specification, and this general specification shall prevail in the sequence named. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.