Draft Document - Aerospace series; aluminium alloy (7075); solution treated, water quench, controlled stretched and artificially aged (T6510); extruded bar and section 1.2 (a or D) 100 mm
文件草案——航空航天系列；铝合金（7075）；溶液处理、水淬、控制拉伸和人工老化（T6510）；挤压棒材和型材1.2度（a或D）100 mm

1989-09-01

Aluminium alloy (6061) - Solution treated, water quench and artificially aged (T6) - Drawn bar - 6 铝合金（6061）-固溶处理、水淬和人工时效（T6）-拉拔棒材-6<或=d<或=75 mm-具有粗周边晶粒控制

1988-03-31

Aluminium alloy (7150) - Solution treated, water quenched controlled stretched and artificially aged (T6511) - Extruded bar and section (a or D) 铝合金（7150）-固溶处理、水淬控制拉伸和人工时效（T6511）-挤压棒材和型材（a或D）<或=90 mm-周边粗晶控制

1988-10-17

Aluminium alloy (2017A) - Solution treated, water quench, cold worked and naturally aged (T3) - Sheet and strip - 0,4 铝合金（2017A）-固溶处理、水淬、冷加工和自然时效（T3）-薄板和带材-0.4<或=a<或=6 mm

1988-03-31

Aluminium alloy (2024) - Solution treated, water quench, cold worked and naturally aged (T3) - Drawn tube for structures - 0,6 铝合金（2024）-固溶处理、水淬、冷加工和自然时效（T3）-结构用拉制管-0.6<或=a<或=12.5 mm

1988-03-31

Aluminium alloy (7075) - Solution treated, controlled stretched and artificially aged (T79510) - Extruded bars and sections - 1,2 < (a or D) 铝合金（7075）-固溶处理、控制拉伸和人工时效（T79510）-挤压棒材和型材-1,2<（a或D）<或=100 mm-周边粗晶控制

1988-10-17

Draft Document - Aerospace series; aluminium alloy (6061); solution treated, water quench and artificially aged (T6); drawn bar 6 D 75 mm, with coarse peripheral grain control
文件草案——航空航天系列；铝合金（6061）；溶液处理、水淬和人工老化（T6）；拉拔钢筋6°D°75 mm 周边粗晶粒控制

1989-09-01

Draft Document - Aerospace series; aluminium alloy (2214); solution treated, water quench and artificially aged (T6); extruded bar and section 1.2 (a or D) 100 mm with coarse peripheral grain control
文件草案——航空航天系列；铝合金（2214）；溶液处理、水淬和人工老化（T6）；挤压棒材和第1.2节（a或D）100 mm 周边粗粒控制

1989-09-01

Draft Document - Aerospace series; aluminium alloy (2017A); solution treated, water quench, cold worked and naturally aged (T3); sheet and strip 0.4 a 6 mm
文件草案——航空航天系列；铝合金（2017A）；溶液处理、水淬、冷加工和自然老化（T3）；0.4°a°6 mm的薄板和带材

1989-09-01

Draft Document - Aerospace series; aluminium alloy (2024); solution treated, water quench, cold worked and naturally aged (T3); drawn tube for structures 0.6 a 12.5 mm
文件草案——航空航天系列；铝合金（2024年）；溶液处理、水淬、冷加工和自然老化（T3）；0.6°a°12.5 mm结构用拉拔管

1989-09-01

Specification for extruded bars and sections of aluminium-zinc-copper-chromium alloy (solution treated, controlled stretched and artificially aged) (not exceeding 150 mm diameter or minor sectional dimension) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.23) (7075)
铝锌铜铬合金挤压棒材和型材规范（固溶处理、控制拉伸和人工时效）（直径不超过150mm或较小截面尺寸）（Zn 5.6、Mg 2.5、Cu 1.6、Cr 0.23）（7075）

1990-02-28