本程序描述了评估工业热喷涂（金属化）承包商资质的方法，并定义了评估承包商评估和接受待金属化表面处理以及热喷涂（1）铝、锌、锌涂层的能力的最低标准，及其合金，用于钢和/或（2）钢筋混凝土上的锌阳极的防腐。承包商应具备钢材、混凝土或钢材和混凝土的资质。SSPC-QP 6证书/名称将指明资格类别。本程序的目的是确定热喷涂承包商或车间是否具备人员、组织、资格、程序和知识，以确定表面处理的可接受性，在业主规定的条件和限制下，涂敷热喷涂（金属化）涂层，并涂敷所需质量的密封。

This procedure describes a method for evaluating the qualifications of industrial thermal spray (metallizing) contractors and defines a minimum standard to evaluate the contractor's capability to evaluate and accept the preparation of the surface to be metallized and to thermally spray (1) coatings of aluminum, zinc, and their alloys for corrosion protection of steel and/or (2) zinc anodes on steel reinforced concrete. The contractor shall be qualified for steel, concrete, or both steel and concrete. The SSPC-QP 6 certificate/designation will indicate the qualification category. The objective of this procedure is to determine if a thermal spray contractor or shop has the personnel, organization, qualifications, procedures, and knowledge, to determine acceptability of surface preparation, apply thermal spray (metallized) coatings, and apply sealing of the required quality under the conditions and restrictions specified by the owner.