Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion
公差为4H至8H和4G至6G的ISO公制粗牙距和细牙距用磨光丝锥——螺纹部分的制造公差

1973-12-01

GROUND THREAD TAPS FOR ISO METRIC THREADS OF TOLERANCES 4H TO 8H AND 4G TO 6G COARSE AND FINE PITCHES. MANUFACTURING TOLERANCES ON THE THREADED PORTION.
公差为4H至8H和4G至6G的ISO公制粗牙距和细牙距螺纹的磨光丝锥 螺纹部分的制造公差

1991-01-10

Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Amendment 1
公差为4H至8H和4G至6G的ISO公制粗牙距和细牙距螺纹用磨光丝锥.螺纹部分的制造公差.修改件1

1984-07-01

Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Amendment 2
公差为4H至8H和4G至6G的ISO公制粗牙距和细牙距螺纹用磨光丝锥.螺纹部分的制造公差.修改件2

1986-09-25

Tolerances on the threaded portion of taps - Part 6: Ground taps for tapped holes (EG) for wire thread inserts according to DIN 8140 for ISO metric coarse and fine pitch threads; Manufacturing tolerances on the threaded portion
丝锥螺纹部分公差的制造.第6部分:DIN 8140中ISO米制粗牙和细牙螺纹用钢丝螺纹嵌件螺纹孔（EG）用磨制丝锥

2003-07-01

ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing (ISO 965-4:1998)
ISO通用米制螺纹公差第4部分:镀锌后与公差位置为H或G的内螺纹配合的热浸镀锌外螺纹的尺寸限制

2002-05-01

ISO general purpose metric screw threads — Tolerances — Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
Iso通用公制螺纹螺纹 - 公差 - 第4部分:热浸镀锌外螺纹的尺寸限制 与内螺纹螺纹配合 镀镍后具有公差位置H或G

2021-07-06

ISO general purpose metric screw threads -- Tolerances -- Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
ISO通用米制螺纹公差第4部分:镀锌后与公差位置为H或G的内螺纹配合的热浸镀锌外螺纹的尺寸限制

2001-01-01

Draft Document - ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing (ISO/DIS 965-4:2020); Text in German and English
文件草稿ISO通用米制螺纹公差第4部分:镀锌后与公差位置为H或G的内螺纹配合的热浸镀锌外螺纹的尺寸限制；德语和英语文本

2021-01-01