BS EN 15273-3:2013+A1:2016:定义了安装、验证和维护结构附近各种结构所需的各种外形 测量列出了确定结构规格时需要考虑的各种现象；定义一种可用于计算这些现象的各种轮廓的方法；列出了确定轨道中心之间距离的规则；列出建造平台时应遵守的规则；列出了确定受电弓轨距的规则； 列出了计算目录中结构量规所需的公式。规定的轨距包括待测量和维护的空间，以允许车辆运行，以及 用于确定一辆或多辆机车上运行的机车车辆尺寸的计算和验证规则 无干扰风险的基础设施。本标准定义了证明基础设施和滚动轴承之间量规兼容性的方法 股票本标准规定了以下各方的责任: 对于基础设施:轨距间隙；维修基础设施监测。对于机车车辆:运行机车车辆与相关轨距的符合性；随着时间的推移保持这种合规性。这些标准中包含的仪表是作为其在欧洲标准中应用的一部分而开发的 铁路。其他网络，如区域、本地、城市和郊区网络，也可采用该标准 本标准中定义的法规。他们可能需要使用特定的方法，尤其是 其中:使用特定的车辆（例如:在两条轨道上运行的地下列车、有轨电车等）；在其他半径范围内使用；本标准中的目录仅包括一系列仪表，并不详尽。每个 网络可以根据自己的需要自由定义仪表。交叉引用:EN 13232-1EN 13232-3EN 13232-9EN 13803-1EN 15273-1:2013+A1:2016EN 15273-2:2013+A1:2016EN 50119EN 50367UIC 505-1:2006UIC 505-4:1977UIC 606-1:1989UIC 506: 2008EN 13803-2包含以下内容:修正案，2017年3月。修订并替换BS EN 15273-3:2013

BS EN 15273-3:2013+A1:2016:defines the various profiles needed to install, verify and maintain the various structures near the structure gauge;lists the various phenomena to be taken into account to determine the structure gauge;defines a methodology that may be used to calculate the various profiles from these phenomena;lists the rules to determine the distance between the track centres;lists the rules to be complied with when building the platforms;lists the rules to determine the pantograph gauge;lists the formulae needed to calculate the structure gauges in the catalogue.The defined gauge includes the space to be gauged and maintained to allow the running of rolling stock, and the rules for calculation and verification intended for sizing the rolling stock to run on one or several infrastructures without interference risk.This standard defines methodologies to demonstrate gauge compatibility between infrastructure and rolling stock.This standard defines the responsibilities of the following parties:for the infrastructure:gauge clearance;maintenance;infrastructure monitoring.for the rolling stock:compliance of the operating rolling stock with the gauge concerned;maintenance of this compliance over time.The gauges included in these standards have been developed as part of their application on European railways. Other networks such as regional, local, urban and suburban networks may apply the gauge regulations defined in this standard. They may be required to make use of specific methodologies, particularly where:specific rolling stock is used (for example: underground trains, trams, etc. operating on two rails);use occurs in other ranges of radii;others, etc.The catalogue included in this standard only includes a selection of gauges and is not exhaustive. Each network is free to define the gauges in accordance with their own needs.Cross References:EN 13232-1EN 13232-3EN 13232-9EN 13803-1EN 15273-1:2013+A1:2016EN 15273-2:2013+A1:2016EN 50119EN 50367UIC 505-1:2006UIC 505-4:1977UIC 606-1:1989UIC 506:2008EN 13803-2Incorporates the following:Amendment, March 2017. Amends and replaces BS EN 15273-3:2013