本文件规定了道路和其他交通区域使用的混合组沥青混凝土和沥青乳液厂拌混合料的要求。含乳化沥青的沥青混凝土用于面层、结合层、调节层和基层。它是一种混合物，在安装后机械性能会随着时间的推移而变化。与其他沥青一样，这不仅仅是在冷却方面，还包括固化效果。 注:含乳化沥青的沥青混凝土是一种机械性能随时间变化的混合物 由于固化，安装后的时间。交叉引用:EN 12697-2EN 12697-4EN 13808EN 13075-2EN 13108-8EN 932-3EN 1427EN 12595EN 1431EN 12697- 27EN 13043EN 12697-44EN 933-10EN 12697-55EN 12697-5EN 12697-31EN 13501-1EN 12697-22EN 1008EN 1097-6:2013EN 12697-8EN 933-1EN 1426EN 12697-35EN 1428EN ISO 11925-2EN 12697-23EN 1097-7EN 12697-26EN 12697-56EN 12697-1EN 12697-29EN 12697-29EN 12697-6EN 12697-32EN 12697-53EN 12596EN 12697-12EN 13075-1EN 12697-28EN 12697-33EN 1265497所有当前的修改件都可以随时购买购买本文件。

This document specifies requirements for plant mixtures of the mix group Asphalt concrete with bituminous emulsion for use on roads, and other trafficked areas. Asphalt concrete with bituminous emulsion is used for surface courses, binder courses, regulating courses, and bases. It is a mixture in which mechanical properties evolve over time following installation. This is not just in terms of cooling, as other asphalts but also includes curing effects. NOTE Asphalt concrete with bituminous emulsion is a mixture in which mechanical properties evolve over time following installation because of curing.Cross References:EN 12697-2EN 12697-4EN 13808EN 13075-2EN 13108-8EN 932-3EN 1427EN 12595EN 1431EN 12697-27EN 13043EN 12697-44EN 933-10EN 12697-55EN 12697-5EN 12697-31EN 13501-1EN 12697-22EN 1008EN 1097-6:2013EN 12697-8EN 933-1EN 1426EN 12697-35EN 1428EN ISO 11925-2EN 12697-23EN 1097-7EN 12697-26EN 12697-56EN 12697-1EN 12697-29EN 12697-6EN 12697-32EN 12697-53EN 12596EN 12697-12EN 13075-1EN 12697-28EN 12697-33EN 12697-3EN 12697-54All current amendments available at time of purchase are included with the purchase of this document.