钛及钛合金熔焊技术要求
Technical requirements for fusion welding of titanium and titanium alloy

2011-07-19

舰船用钛及钛合金铸件补焊工艺要求
Technical requirements of repair welding for titanium and titanium alloys cast used of naval ships

2011-07-19

Welded circular titanium and titanium alloy tubes; technical delivery conditions
钛及钛合金焊接圆管；交货技术条件

1990-11-01

Titanium and titanium alloys — Strip for welded tubes — Technical delivery conditions
钛和钛合金.焊接管用带材.交货技术条件

2022-10-06

高温钛合金激光焊接技术要求
Technical requirements for laser welding of high temperature titanium alloy

2019-08-30

Tubes of titanium and titanium alloys. Welded tubes for condensers and heat exchangers. Technical delivery conditions
钛和钛合金管 冷凝器和热交换器用焊接管 交货技术条件

2016-04-30

Tubes of titanium and titanium alloys — Welded tubes for condensers and heat exchangers — Technical delivery conditions
钛和钛合金管 - 冷凝器和热交换器的焊接管 - 技术交货条件

2016-03-24

Titanium and titanium alloys. Forging stock and forgings. Technical specifications-General requirements
钛和钛合金 锻造坯料和锻件 技术规格 一般要求

1994-07-15

Titanium and titanium alloy remelting stock and castings. Technical specification-General requirements
钛及钛合金重熔坯料和铸件 技术规格 一般要求

1995-10-15

AEROSPACE SERIES. TITANIUM AND TITANIUM ALLOYS. FORGING STOCK AND FORGINGS. TECHNICAL SPECIFICACION. PART 1: GENERAL REQUIREMENTS.
航空航天系列 钛和钛合金 锻造坯料和锻件 技术规格 第1部分:一般要求

1996-02-12

AEROSPACE SERIES. TITANIUM AND TITANIUM ALLOY REMELTING STOCK AND CASTings. Technical specification. Part 1: General requirements.
航空航天系列 钛及钛合金重熔坯料和铸件 技术规格 第1部分:一般要求

1996-06-19

Aerospace series - Titanium and titanium alloy remelting stock and castings; technical specification - Part 1: General requirements; German version EN 2545-1:1995
航空航天系列.钛和钛合金重熔坯料和铸件；技术规范.第1部分:一般要求；德文版EN 2545-1:1995

1995-08-01

Aerospace series - Titanium and titanium alloys - Forging stock and forgings - Technical specification - Part 1: General requirements; German version EN 2858-1:1994
航空航天系列.钛和钛合金.锻坯和锻件.技术规范.第1部分:一般要求；德文版EN 2858-1:1994

1994-06-01

전자 빔과 레이저 빔 용접 이음부 — 불완전부의 품질등급에 대한 요건과 권고사항 — 제1부: 강, 니켈, 타이타늄 및 그 합금
电子束和激光束焊接接头缺陷质量等级的要求和建议第1部分:钢、镍、钛及其合金

2023-11-10

Electron and laser-beam welded joints — Requirements and recommendations on quality levels for imperfections — Part 1: Steel, nickel, titanium and their alloys
电子束和激光束焊接接头.缺陷质量等级的要求和建议.第1部分:钢、镍、钛及其合金

2019-10-25

Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2003, corrected version:2005, including Technical Corrigendum 1:2006)
焊接.钢、镍、钛及其合金的熔焊接头（不包括束焊）.缺陷的质量等级（ISO 5817-2003 修正版:2005 包括技术勘误1-2006）

2009-04-08

舰船铝合金薄壁结构电阻焊工艺要求
Technical requirements of resistance welding used in aluminum alloy thin-walled tructure for ships

2018-01-18