1.1 这些试验方法包括在承受内部压力时测定玻璃容器的断裂强度。这些试验方法旨在确定制造用于容纳合理预期在加工后产生138 kPa（20 psi）或更大持续压力的产品的容器的压力强度。包括以下两种测试方法: 小节 试验方法A-均匀内压的应用 在预定的时间段内 5 – 7. 试验方法B-内压增加的应用 以预定的恒定速率 8 – 10 1.2 以国际单位制表示的数值应视为标准。括号中给出的值仅供参考。 1.3 本标准并非旨在解决与其使用相关的所有安全问题（如有）。 本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。

1.1 These test methods cover the determination of the breaking strength of glass containers when subjected to internal pressure. These test methods are intended to determine the pressure strength of containers manufactured to contain products reasonably expected to develop a sustained pressure of 138 kPa (20 psi) or greater, after processing. Two test methods are covered as follows: Sections Test Method A—Application of Uniform Internal Pressure for a Predetermined Period 5 – 7 Test Method B—Application of Internal Pressure Increasing at a Predetermined Constant Rate 8 – 10 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.