IEC 60092-504:2016可作为IEC 60092-504:2016获得 包含国际标准及其红线的RLV 版本，显示技术内容与 上一版。 IEC 60092-504:2016规定了用于船舶自动化、控制、监控、警报以及安全和保护系统的电气、电子和可编程设备。与上一版相比，此版本包括以下重大技术变更: a)零件标题已更改，添加了术语“自动化”； b)已列入2011年1月更正的内容； c)增加了新的第5.1款“总则”，对型式试验有一般要求； d)表1内容与文件IACS Req的当前版本一致。1991/Rev.5,2006; e)已考虑到经修订的海事组织第A.1021(26)号决议《警报和指标守则:2009年》； f)已考虑到海事组织MSC.302(87)号决议。因此，在通用术语适用的情况下使用了术语“警报”。这尤其涉及8.4和9.3中的案文； g)新的第8.2.4款:已考虑到经修订的IMO决议MSC.145(77)《散货船水位探测器性能标准:2003年》； h)关于火灾探测和报警系统的第9.1款已完全修订，已考虑到IMO决议MSC.98(73)（FSS规则）及其修正案MSC.292(87):2010； i)增加了新的第9.2款“舱底系统”； j)第9.4款“电源自动控制装置”和第9款。5“电动机驱动辅助设备的自动启动装置”已完全修订； k)第10条“基于计算机的系统”已完全修订； l)增加了关于无线数据通信的新子条款10.3.6； m)增加了关于远程访问的新子条款10.5。

IEC 60092-504:2016 is available as IEC 60092-504:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 60092-504:2016 specifies electrical, electronic and programmable equipment intended for automation, control, monitoring, alert, and safety and protection systems for use in ships. This edition includes the following significant technical changes with respect to the previous edition:
a) the part title has been changed, the term "Automation" was added;
b) the contents of the corrigendum of January 2011 have been included;
c) a new subclause 5.1 "General" with general requirements for type testing has been added;
d) Table 1 contents aligned with current version of document IACS Req. 1991/Rev. 5, 2006;
e) the revised IMO Resolution A.1021(26), Code on alerts and indicators:2009 has been taken into account;
f) IMO Resolution MSC.302(87) has been taken into account. As a consequence, the term "alert" has been used where the generic term applies. This concerns, in particular, the text in 8.4 and 9.3;
g) a new subclause 8.2.4: The revised IMO Resolution MSC.145(77), Performance standards for water level detectors on bulk carriers:2003 has been taken into account;
h) subclause 9.1 about fire detection and alarm systems has been completely revised, IMO Resolution MSC.98(73) (FSS Code) with amendment MSC.292(87): 2010 has been taken into account;
i) a new subclause 9.2 "Bilge systems" has been added;
j) the subclauses 9.4 "Automatic control installations for electrical power supply" and 9.5 "Automatic starting installations for electrical motor-driven auxiliaries" have been completely revised;
k) Clause 10 "Computer based systems" has been completely revised;
l) a new subclause 10.3.6 about wireless data communication has been added;
m) a new subclause 10.5 about remote access has been added.