首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 BS ISO 13357-2:2017
到馆阅读
收藏跟踪
购买正版
Petroleum products. Determination of the filterability of lubricating oils-Procedure for dry oils 石油产品 润滑油可过滤性的测定
发布日期: 2017-07-06
BS ISO 13357-2:2017规定了干燥润滑油可过滤性的评估程序, 尤其是那些为液压应用而设计的。本程序仅适用于矿物基材料 油,因为用其他材料制造的液体(例如耐火液体)可能不兼容 使用指定的测试膜。使用粘度高的润滑油对其应用范围进行了评估 符合ISO 3448中定义的ISO粘度等级(VG)100。在所述范围内,可过滤性如下 定义的粘度不取决于油的粘度。 该程序不适用于某些液压油 通过使用不溶性/部分可溶性添加剂赋予其特定性质,或 通过特别大的分子物种。注:过滤性是液压系统中使用的润滑油的一项基本要求,因为 此应用程序中使用的过滤器。本文件定义了评估干油可过滤性的方法。需要注意的是 一些油在有污染水的情况下表现出较差的过滤特性。 ISO 13357- 1[2]适用于研究水和高温对过滤性的影响,如果 在油中可能存在水的应用中使用油。交叉引用:ISO 3696:1987ISO 1219-1:2012ISO 3448:1992ISO 4788:2005 Ed 2ISO 3170:2004 Ed 3 ISO 13357-1:2017ISO 4259:2006 Ed 3购买本文件时提供的所有现行修订均包含在购买本文件中。
BS ISO 13357-2:2017 specifies a procedure for the evaluation of the filterability of dry lubricating oils, particularly those designed for hydraulic applications. The procedure only applies to mineral-based oils, since fluids manufactured from other materials (e.g. fire-resistant fluids) might not be compatible with the specified test membranes. The range of application has been evaluated with oils of viscosity up to ISO viscosity grade (VG) 100, as defined in ISO 3448. Within the range described, the filterability as defined is not dependent on the viscosity of the oil. The procedure is not suitable for some hydraulic oils on which specific properties have been conferred by the use of insoluble/partially soluble additives, or by particularly large molecular species.NOTE Filterability is a prime requirement for lubricating oils used in hydraulic systems because of the fine filters used in this application.This document defines a method for assessing the filterability of dry oils. It is necessary to note that some oils exhibit poorer filterability characteristics in the presence of contaminating water. ISO 13357-1[2] applies to the investigation of the effect of water and high temperature on filterability, if an oil is used in applications where the presence of water in the oil is likely.Cross References:ISO 3696:1987ISO 1219-1:2012ISO 3448:1992ISO 4788:2005 Ed 2ISO 3170:2004 Ed 3 ISO 13357-1:2017ISO 4259:2006 Ed 3All current amendments available at time of purchase are included with the purchase of this document.
分类信息
发布单位或类别: 英国-英国标准学会
关联关系
研制信息
相似标准/计划/法规
现行
GOST ISO 13357-2-2013
Нефтепродукты. Определение фильтруемости смазочных масел. Часть 2. Метод для обезвоженных масел
石油产品 确定润滑油的过滤性 干油
2013-11-14
现行
KS M ISO 13357-2
석유제품 — 윤활유의 여과도 시험방법 — 제2부: 건식 오일에 대한 절차
石油产品 - 润滑油过滤性的测定 - 第2部分:干油的程序
2018-12-24
现行
KS M ISO 13357-2(2023 Confirm)
석유제품 — 윤활유의 여과도 시험방법 — 제2부: 건식 오일에 대한 절차
石油产品润滑油过滤性的测定第2部分:干油程序
2018-12-24
现行
ISO 13357-2-2017
Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils
石油产品 - 润滑油过滤性的测定 - 第2部分:干油的程序
2017-05-09
现行
GOST ISO 13357-1-2013
Нефтепродукты. Определение фильтруемости смазочных масел. Часть 1. Метод для масел в присутствии воды
石油产品 确定润滑油的过滤性 第1部分油存在于水中
2013-11-14
现行
KS M ISO 13357-1
석유제품 — 윤활유의 여과도 시험방법 — 제1부: 수분 함유 오일에 대한 절차
石油产品 - 润滑油过滤性的测定 - 第1部分:在水存在下的油的程序
2018-12-24
现行
KS M ISO 13357-1(2023 Confirm)
석유제품 — 윤활유의 여과도 시험방법 — 제1부: 수분 함유 오일에 대한 절차
石油产品润滑油可过滤性的测定第1部分:有水存在的油的程序
2018-12-24
现行
ISO 13357-1-2017
Petroleum products — Determination of the filterability of lubricating oils — Part 1: Procedure for oils in the presence of water
石油产品 - 润滑油过滤性的测定 - 第1部分:在水存在下的油的程序
2017-05-09
现行
KS M ISO 2137
석유제품 및 윤활제 — 윤활 그리스 및 페트롤레이텀의 주도 시험방법
石油产品和润滑剂润滑脂和矿脂渗透性的测定
2016-12-29
现行
BS 2000-220-1998
Methods of test for petroleum and its products-Petroleum products and lubricants. Determination of rust-prevention characteristics of lubricating greases
石油及其产品的试验方法 石油产品和润滑剂 润滑脂防锈特性的测定
2000-02-15
现行
BS ISO 11009-2021
Petroleum products and lubricants. Determination of water washout characteristics of lubricating greases
石油产品和润滑剂 润滑脂水洗特性的测定
2021-08-19
现行
KS M ISO 11009(2019 Confirm)
석유제품 및 윤활유 — 그리스의 수세내수도 시험방법
石油产品和润滑剂 - 确定润滑脂的水洗特性
2014-12-29
现行
SH/T 0109-2004
润滑脂抗水淋性能测定法
Petroleum products and lubricants-Determination of water washout characteristics of lubricating greases
2004-04-09
现行
KS M ISO 2137
석유제품 및 윤활제 — 윤활 그리스 및 페트롤레이텀의 주도 시험방법
石油产品和润滑剂.润滑脂和凡士林的锥入度测定
2021-12-29
现行
KS M ISO 11009(2024 Confirm)
석유제품 및 윤활유 — 그리스의 수세내수도 시험방법
石油产品和润滑剂润滑脂水洗特性的测定
2014-12-29
现行
BS ISO 2137-2020
Petroleum products and lubricants. Determination of cone penetration of lubricating greases and petrolatum
石油产品和润滑剂 润滑脂和矿脂锥入度的测定
2020-05-20
现行
ISO 2137-2020
Petroleum products and lubricants — Determination of cone penetration of lubricating greases and petrolatum
石油产品和润滑剂 - 润滑油和凡士林锥体渗透的测定
2020-05-13
现行
ISO 11009-2021
Petroleum products and lubricants — Determination of water washout characteristics of lubricating greases
石油产品和润滑剂 - 确定润滑脂的水洗特性
2021-08-12
现行
GOST ISO 11009-2013
Нефтепродукты и смазки. Определение стойкости консистентных смазок к вымыванию водой
石油产品和润滑油 测定润滑脂的耐水洗性
2013-11-14
现行
GOST ISO 11007-2013
Нефтепродукты и смазочные материалы. Определение противокоррозионных свойств консистентных смазок
石油产品和润滑油 确定润滑脂的防锈特性
2013-10-18