ISO 28927的本部分规定了一种实验室方法，用于测量手持式电动锯、往复式抛光和锉磨机以及摆动或旋转小型锯手柄处的手传振动发射。这是一种型式试验程序，用于确定在规定试验条件下运行的机器夹紧区域的振动幅度。其目的是将结果用于比较同一类型机器的不同型号。 ISO 28927的本部分适用于装有锉刀或刮刀的用于表面修整的往复式锉刀 抛光工具、用于分模的锯子、医用石膏或木材，或配备用于各种材料的锯片，以及主要用于切割金属或复合材料的小型圆锯（见第5条），无论是气动驱动还是通过其他方式驱动。它不适用于通常单手使用的锉刀，也不适用于用于切割木材的大型圆锯。 交叉引用:ISO 5391:2003ISO 16893-1:2008ISO 2787:1984ISO 20643:2005ISO 17066:2007ISO 5349:2001EN 12096:1997ISO 12100IEC 60745包含以下内容:修订，2019年7月；勘误表，2018年7月

This part of ISO 28927 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held, power-driven saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine run under specified test conditions. It is intended that the results be used to compare different models of the same type of machine. This part of ISO 28927 is applicable to reciprocating files intended for surface finishing equipped with a file or polishing tool, saws intended for parting sheets, plaster for medical use or wood, or equipped with a saw blade for use on all kinds of materials, and small circular saws primarily intended for cutting metal or composite materials (see Clause 5), whether driven pneumatically or by other means. It is not applicable to files that are normally used with one hand on the file blade, nor to large circular saws intended for cutting wood.Cross References:ISO 5391:2003ISO 16893-1:2008ISO 2787:1984ISO 20643:2005ISO 17066:2007ISO 5349:2001EN 12096:1997ISO 12100IEC 60745Incorporates the following:Amendment, July 2019; Corrigendum, July 2018