SAE J514/1_202403-流体动力和一般用途的金属连接.第1部分:37度扩口接头-国家数字标准馆

现行 SAE J514/1_202403

到馆提醒

收藏跟踪

购买正版

Metallic Connections for Fluid Power and General Use - Part 1: 37 Degree Flared Fittings 流体动力和一般用途的金属连接.第1部分:37度扩口接头

发布日期： 2024-03-01

SAE J514的本部分涵盖了37度扩口卡套管接头的一般规范和尺寸规范。附录B中还包括带有NPTF管螺纹的37度扩口管件。这些管件适用于工业设备和商业产品的液压系统。这些配件能够在表6规定的工作压力下运行的液压系统中提供防漏、全流量连接。由于许多因素会影响液压系统将要或不会令人满意地运行的压力，因此表6中所示的值不应被视为保证的最小值。对于任何应用，建议用户和配件制造商进行充分的测试和审查，以确保性能水平是安全和令人满意的。

This part of SAE J514 covers general and dimensional specifications for 37 degree flared tube fittings. Also included are 37 degree flared fittings with NPTF pipe threads inAppendix B. These fittings are intended for general application in hydraulic systems on industrial equipment and commercial products.These fittings are capable of providing leak-proof, full flow connections in hydraulic systems operating at working pressures as specified inTable 6. Since many factors influence the pressure at which a hydraulic system will or will not perform satisfactorily, the values shown inTable 6should not be construed as a guaranteed minimum.For any application, it is recommended that sufficient testing be conducted and reviewed by both the user and fitting manufacturer to assure that performance levels will be safe and satisfactory.

分类信息

发布单位或类别：美国-美国机动车工程师协会

关联关系

研制信息

相似标准/计划/法规

BS ISO 8434-2-2007

Metallic tube connections for fluid power and general use-37° flared connectors
流体动力和一般用途的金属管接头

ISO 8434-2-2007

Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors
流体动力和通用金属管接头第2部分:37度扩口接头

ISO 8434-1-2018

Metallic tube connections for fluid power and general use — Part 1: 24° cone connectors
流体动力和一般用途的金属管连接件.第1部分:24度；锥形连接器

UNE-EN ISO 8434-1-2008

Metallic tube connections for fluid power and general use - Part 1: 24 degree cone connectors (ISO 8434-1:2007)
流体动力和一般用途的金属管接头.第1部分:24度锥形接头（ISO 8434-1-2007）

GB/T 9065.5-2010

液压软管接头第5部分：37°扩口端软管接头
Connections for hydraulic fluid power and general use - Hose fittings - Part 5: Hose fittings with 37°degree flared ends

ISO 1179-1-2013

Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
通用和流体动力连接件——带ISO 228-1弹性体或金属对金属密封螺纹的端口和螺柱端第1部分:螺纹端口

ISO 15171-1-1999

Connections for fluid power and general use — Hydraulic couplings for diagnostic purposes — Part 1: Coupling not for connection under pressure
流体动力和一般用途的连接——诊断用液压联轴器第1部分:不用于压力下连接的联轴器

ISO 9974-1-1996

Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
通用和流体动力连接件——带ISO 261弹性体或金属对金属密封螺纹的端口和螺柱端第1部分:螺纹端口

SAE J514/3_202312

Metallic Connections for Fluid Power and General Use - Part 3: NPTF Pipe Adapters and NPSM Adapter Unions
流体动力和一般用途的金属连接.第3部分:NPTF管接头和NPSM接头活接头

ISO 8434-3-2005

Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors
流体动力和通用金属管接头第3部分:O形圈端面密封接头

BS 05/30135256 DC

ISO/DIS 1179-1. Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal. Part 1. Threaded ports
ISO/DIS 1179-1 一般用途和流体动力的连接端口和螺柱端部采用ISO 228-1弹性螺纹或金属对金属螺纹第一部分螺纹端口

BS EN ISO 1179-1-2013

Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing-Threaded ports
一般用途和流体动力的连接端口和螺柱端部采用ISO 228-1螺纹采用弹性体或金属对金属密封

ISO 1179-4-2007

Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 4: Stud ends for general use only with metal-to-metal sealing (type B)
通用和流体动力连接件——带ISO 228-1弹性体或金属对金属密封螺纹的端口和螺柱端第4部分:仅用于金属对金属密封的通用螺柱端（B型）

DIN EN ISO 1179-1

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013)
通用和流体动力连接件.带ISO 228-1弹性体或金属对金属密封螺纹的端口和螺柱端.第1部分:螺纹端口（ISO 1179-1-2013）；德文版EN ISO 1179-1:2013

UNE-EN ISO 1179-1-2009

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2007)
通用和流体动力连接件.带ISO 228-1弹性体或金属对金属密封螺纹的端口和螺柱端.第1部分:螺纹端口（ISO 1179-1-2007）

BS 01/714272 DC

ISO/DIS 1179-1. Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing. Part 1: Threaded ports
ISO/DIS 1179-1 一般用途和流体动力的连接端口和螺柱端部采用ISO 228-1螺纹采用弹性体或金属对金属密封第1部分:螺纹端口

UNE-EN ISO 9974-1-2001

CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 261 THREADS WITH ELASTOMERIC OR METAL-TO METAL SEALING - PART 1: TREADED PORTS. (ISO 9974-1:1996).
一般用途和流体动力连接件.带ISO 261螺纹的弹性或金属对金属密封的端口和螺柱端.第1部分:螺纹端口（ISO 9974-1-1996）

DIN ISO 15171-1

Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 1: Coupling not for connection under pressure (ISO 15171-1:1999)
流体动力和通用连接件诊断用液压联轴器第1部分:非压力连接用联轴器

ISO 12151-5-2007

Connections for hydraulic fluid power and general use — Hose fittings — Part 5: Hose fittings with ISO 8434-2 37 degree flared ends
液压传动和通用连接件——软管配件第5部分:带ISO 8434-2 37度扩口端的软管配件

ISO 8434-6-2009

Metallic tube connections for fluid power and general use — Part 6: 60 degree cone connectors with or without O-ring
流体动力和通用金属管接头第6部分:带或不带O形圈的60度锥形接头

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统