首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 SAE AMSP5510B
到馆提醒
收藏跟踪
购买正版
O-Ring, Preformed, Straight Thread Tube Fitting Boss, Type I Hydraulic (-65 to 160 °F) O形圈 预制 直螺纹管接头凸台 I型液压(-65至160°F)
发布日期: 2023-04-12
本规范涵盖了直螺纹管配件凸台O形圈的材料、设计、测试和包装要求。本说明书涵盖的O形圈是丙烯腈-丁二烯橡胶。
This specification covers requirements for the material, design, testing and packaging of straight thread tube fitting boss O-rings. O-rings covered by this specification are acrylonitrile-butadiene rubber.
分类信息
关联关系
研制信息
归口单位: AEROC
相似标准/计划/法规
现行
NAS 1602
Packing, Preformed, O-Ring, Straight Thread Tube Fitting Boss, Sizes
预成型O形圈直螺纹管件凸台填料尺寸
1994-11-30
现行
QPL QPL-AMS-P-5510-1
PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE I HYDRAULIC (-65 °F TO 160 °F)
I型液压预成型直螺纹管件凸台填料(-65°F至160°F)
2005-07-13
现行
NAS 1595
Packing, Preformed - Straight Thread Tube Fitting Boss. Mil-R-25897 Rubber, 75 Shore, O-Ring
预成型填料-直螺纹管件凸台 Mil-R-25897橡胶 75肖氏 O形圈
1973-08-15
现行
NAS 1596
Packing, Preformed - Straight Thread Tube Fitting Boss, Mil-R-25897 Rubber, 90 Shore, O-Ring
预成型填料-直螺纹管接头凸台 Mil-R-25897橡胶 90肖氏 O形圈
1973-08-15
现行
NAS 1612 Rev.8
PACKING, ETHYLENE PROPYLENE PREFORMED, O-RING PHOSPHATE ESTER RESISTANT, STRAIGHT THREAD TUBE FITTING BOSS (-65 DEG F TO 250/300DEG F)
乙烯-丙烯预制O形圈磷酸酯耐直螺纹管件凸台填料(-65华氏度至250/300华氏度)
2014-06-30
现行
MIL MIL-P-81716
PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE II HYDRAULIC ( MINUS 65 DEG F TO PLUS 275 DEG F )
II型液压直螺纹管件凸台预制填料(负65华氏度至正275华氏度)
1969-02-14
现行
MIL MIL-P-81716 Notice 1-Inactivation
PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE II HYDRAULIC ( MINUS 65 DEG F TO PLUS 275 DEG F )
预成型直螺纹卡套管接头凸台填料 II型液压(-65°F至+275°F)
1997-06-16
现行
MIL MIL-P-5510C
PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE I HYDRAULIC (-65 DEG. TO 160 DEG. F) (SUPERSEDING MIL-P-5510B) (S/S BY SAE-AMS-P-5510)
I型液压预成型直螺纹管件凸台填料(-65°F至160°F)(取代MIL-P-5510B)(由SAE-AMS-P-5510提供)
1977-08-04
现行
MIL MIL-P-5510C Notice 4-Cancellation
PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE I HYDRAULIC (-65 DEG. TO 160 DEG. F) (SUPERSEDING MIL-P-5510B) (S/S BY SAE-AMS-P-5510)
预成型直螺纹卡套管接头凸台填料 I型液压(-65°至160°F)(取代MIL-P-5510B)(由SAE-AMS-P-5510提供)
2004-03-08
现行
MIL MIL-P-5510C Notice 3-Inactivation
PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE I HYDRAULIC (-65 DEG. TO 160 DEG. F) (SUPERSEDING MIL-P-5510B) (S/S BY SAE-AMS-P-5510)
预成型直螺纹卡套管接头凸台填料 I型液压(-65°至160°F)(取代MIL-P-5510B)(由SAE-AMS-P-5510提供)
1997-12-31
现行
MIL MIL-P-5510C Notice 2-Validation
PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE I HYDRAULIC (-65 DEG. TO 160 DEG. F) (SUPERSEDING MIL-P-5510B) (S/S BY SAE-AMS-P-5510)
预成型直螺纹卡套管接头凸台填料 I型液压(-65°至160°F)(取代MIL-P-5510B)(由SAE-AMS-P-5510提供)
1992-12-10
现行
QPL QPL-5510-17
PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE I HYDRAULIC (-65 DEG. TO 160 DEG.F) (SUPERSEDING QPL-5510-16) (NO S/S DOCUMENT) PRI-QPL-AMS-P-5510
I型液压预成型直螺纹管件凸台填料(-65°至160°F)(取代QPL-5510-16)(无S/S文件)PRI-QPL-AMS-P-5510
1996-11-22