本文件规定了使用以下方法测量纸张和纸板抗弯性的程序: 泰伯式测试仪。 本文件用于确定使38 mm桩自由端偏转所需的弯矩 当以50 mm的弯曲长度施加荷载时，宽垂直夹紧试样弯曲15°。对于 如果弯曲15°，则可能永久变形的板材可以使用半弯曲角，即7,5°。弯曲阻力以弯矩和Taber型测试仪制造商设置的参数表示。交叉引用:ISO 186ISO 187ISO 5725- 1:1994ISO 536ISO/TR 24498购买本文件时提供的所有现行修订版均包含在购买本文件中。

This document specifies procedures to measure the bending resistance of paper and paperboard using a Taber-type tester. This document is used to determine the bending moment required to deflect the free end of a 38 mm wide vertically clamped specimen by 15° when the load is applied at a bending length of 50 mm. For boards that tend to be permanently deformed if bent through 15°, the half bending angle, i.e. 7,5°, can be used. The bending resistance is expressed in terms of the bending moment and parameters set by the manufacturer of the Taber-type tester.Cross References:ISO 186ISO 187ISO 5725-1:1994ISO 536ISO/TR 24498All current amendments available at time of purchase are included with the purchase of this document.