1.1 本试验方法包括一种加速试验，用于测量成品乙烯基织物中的增塑剂转移到与其接触的涂层中的趋势。 注1: 织物样品的老化可能会影响测试结果。为了确保最可靠的结果，使用最接近涂层的织物样品进行测试。 1.2 以国际单位制表示的数值应视为标准。括号中给出的值仅供参考。 1.3 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 3.1 成品乙烯基织物中的增塑剂可以转移到与其接触的涂料中。当这种情况发生时，就会出现令人反感的损坏和软化。本试验方法涵盖了测量这种趋势的加速试验。

1.1 This test method covers an accelerated test for the measurement of a tendency for plasticizers in finished vinyl fabric to be transferred to coatings with which they come in contact. Note 1: Age of fabric sample may affect results of test. To ensure most reliable results, test with fabric sample closest in age to what will be coated. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 3.1 Plasticizers in finished vinyl fabric can be transferred to coatings with which they come in contact. When this takes place, objectionable marring and softening occur. This test method covers an accelerated test for measurement of this tendency.