首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 GB/T 38882-2020
到馆阅读
收藏跟踪
购买正版
无损检测 铁磁性管件壁厚变化漏磁检测方法 Non-destructive testing—Testing method for wall-thickness loss of ferromagnetic tubes using magnetic flux leakage
发布日期: 2020-06-02
实施日期: 2020-12-01
本标准规定了对铁磁性管件壁厚损失采用外置磁化方式进行漏磁检测的方法。 本标准适用于外径不小于 10 mm 且壁厚不大于 20 mm 的铁磁性管件(焊管除外)在制造、加工和修复的过程中,对管件壁厚损失的在线检测。本标准也适用于石油用管、端头加厚钢管壁厚损失的自动检测
分类信息
关联关系
研制信息
相似标准/计划/法规
现行
AS 2452.1-2004
Non-destructive testing - Determination of thickness, Part 1: Determination of wall thickness of pipe by the use of radiography
无损检测.厚度测定 第1部分:用射线照相法测定管道壁厚
2004-11-01
现行
BS M 40-1972
Methods for measuring coating thickness by non-destructive testing
用无损检测法测量涂层厚度的方法
1972-02-14
现行
BS EN 17290-2021
Non-destructive testing. Ultrasonic testing. Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique
无损检测 超声波检测 使用TOFD技术检查因侵蚀和/或腐蚀造成的厚度损失
2021-10-29
现行
DIN EN 17290
Non-destructive testing - Ultrasonic testing - Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique
无损检测-超声波检测-使用TOFD技术检查因侵蚀和/或腐蚀造成的厚度损失;德文版EN 17290:2021
2021-12-01
现行
JIS Z 2355-1-2016
Non-destructive testing -- Ultrasonic thickness measurement -- Part 1: Measurement method
无损检测超声波测厚第1部分:测量方法
2016-01-01
现行
GB/T 37158-2018
无损检测 工业计算机层析成像(CT)检测最大可检测钢厚度测试方法
Non-destructive testing—Test method for measuring the maximum detectable steel thickness by industrial computed tomography(CT)
2018-12-28
现行
JIS Z 2355-2-2016
Non-destructive testing -- Ultrasonic thickness measurement -- Part 2: Method for evaluating performance characteristics of ultrasonic thickness measuring equipment
无损检测超声测厚第2部分:超声测厚设备性能特性评定方法
2016-01-01
现行
BS EN ISO 16526-2-2020
Non-destructive testing. Measurement and evaluation of the X-ray tube voltage-Constancy check by the thick filter method
无损检测 X射线管电压的测量和评估
2020-03-19
现行
AS/NZS 1580.108.1-1994
Paints and related materials - Methods of test, Method 108.1: Determination of dry film thickness on metallic substrates - Non-destructive methods
涂料和相关材料.试验方法 方法108.1:金属基材上干膜厚度的测定.无损方法
1994-07-18
现行
AS/NZS 2111.21-1996
Textile floor coverings - Tests and measurements, Method 21: Non-destructive measurement of pile thickness above the backing - WRONZ gauge method
铺地织物.试验和测量 方法21:背衬上绒头厚度的无损测量.WRONZ量规法
1996-08-05
现行
ASTM D8331/D8331M-20
Standard Test Method for Measurement of Film Thickness of Thin-Film Coatings by Non-Destructive Means Using Ruggedized Optical Interference
用加固光学干涉法用非破坏性方法测量薄膜涂层厚度的标准试验方法
2020-08-01
现行
GB/T 41105.2-2021
无损检测 X射线管电压的测量和评价 第2部分:厚板滤波法稳定性核查
Non-destructive testing—Measurement and evaluation of the X-ray tube voltage—Part 2: Constancy check by the thick filter method
2021-12-31
现行
UNE-EN 12544-2-2000
NON-DESTRUCTIVE TESTING. MEASUREMENT AND EVALUATION OF THE X-RAY TUBE VOLTAGE. PART 2: CONSTANCY CHECK BY THE THICK FILTER METHOD.
无损检测 X射线管电压的测量和评估 第2部分:通过粗滤器方法进行恒定性检查
2000-07-17
现行
ISO 16526-2-2011
Non-destructive testing — Measurement and evaluation of the X-ray tube voltage — Part 2: Constancy check by the thick filter method
无损检测——X射线管电压的测量和评估第2部分:用厚滤光片法进行恒定性检查
2011-12-15
现行
BS EN 10307-2001
Non-destructive testing. Ultrasonic testing of austenitic and austentitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method)
无损检测 厚度等于或大于6mm的奥氏体和奥氏体-铁素体不锈钢扁平产品的超声波检测(反射法)
2002-03-20
现行
UNE-EN 10307-2002
Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method).
无损检测.厚度等于或大于6mm的奥氏体和奥氏体-铁素体不锈钢扁平产品的超声波检测(反射法)
2002-06-28
现行
DIN EN 10307
Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steel flat products of thickness equal to or greater than 6 mm (reflection method); English version of DIN EN 10307
无损检测——厚度等于或大于6mm的奥氏体和奥氏体-铁素体不锈钢扁平产品的超声波检测(反射法);德文版EN 10307:2001
2002-03-01