1.1 本试验方法 2. 规定了用于测试和评估健身器材可及性以符合规范的程序和设备 F3021 设计参数。在可能和适用的情况下，将使用和参考其他公认机构的公认测试方法。如果本文件与规范之间存在冲突 F3021 ，规格 F3021 优先。 1.2 本试验方法应与规范结合使用 F3021 . 1.3 本标准将作为附加要求，以解决功能受限和残疾人员对设备的无障碍性问题。 注1: 适用于特定设备（如跑步机、自行车、椭圆机和强度设备）的其他测试方法已在设备特定标准中公布。 1.4 以国际单位制表示的值应被视为标准。括号中给出的值仅供参考。 1.5 本标准并不旨在解决与其使用相关的所有安全问题（如果有的话）。本标准的使用者有责任在使用前建立适当的安全、健康和环境实践，并确定监管限制的适用性。 1.6 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。

1.1 This test method 2 specifies procedures and equipment used for testing and evaluating the accessibility of fitness equipment for compliance to Specification F3021 design parameters. Where possible and applicable, accepted test methods from other recognized bodies will be used and referenced. In case of a conflict between this document and Specification F3021 , Specification F3021 takes precedence. 1.2 This test method is to be used in conjunction with Specification F3021 . 1.3 This standard is to be used as additional requirements to address the accessibility of the equipment for persons with functional limitations and impairments. Note 1: Additional test methods applicable to specific pieces of equipment, such as treadmills, bicycles, ellipticals, and strength equipment have been published in the equipment-specific standards. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.