前言:这是CSA Z5300的第一版，纤维素长丝（CF）-为物理测试准备手纸。本标准描述了物理性能测试用纤维素长丝（CF）和CF增强纸浆手抄纸的制备方法。可以研究手抄纸的性能，以表明CF作为纸张或纸巾生产中的增强添加剂的性能。本标准是纤维素纳米材料系列中的第三篇，旨在为加拿大和国际标准的发展奠定基础，以促进纤维素纳米材料在全球市场的引入。纤维素纳米材料系列中的其他标准包括CSA Z5100《纤维素纳米材料-表征试验方法》和CSA Z5200《纤维素纳米材料-空白详细规范》。本标准的制定符合加拿大标准委员会对加拿大国家标准的要求。 CSA集团已将其作为加拿大国家标准发布。范围:1.1本标准描述了用于物理试验的纤维素长丝（CF）和CF增强纸浆低定量手抄纸的制备方法。1.2本标准还包括纤维素微纤维（CMF）和纤维素纳米纤维（CNF）的低基重手抄纸，以及CMF或CNF增强纸浆手抄纸的制备，前提是可以使用所述方法获得质量合格的手抄纸。1.3本标准不包括光学测试用CF、CMF或CNF手抄纸的制备。1.4在本标准中，“应”用于表示要求，即用户为遵守本标准而有义务满足的规定；“应该”用于表示建议或建议但不需要的建议；“可”用于表示一个选项或在标准范围内允许的选项。 注释随附条款不包括要求或替代要求；随附条款的注释的目的是将解释性或信息性材料与文本分开。表和图的注释被视为表或图的一部分，可以作为要求编写。附件被指定为规范性（强制性）或信息性（非强制性）以定义其应用。

Preface:This is the first edition of CSA Z5300,Cellulose filaments (CF) — Preparing handsheets for physical tests.This Standard describes methods for the preparation of handsheets of cellulose filaments (CF) and CF-reinforced pulp handsheets for physical properties testing. The properties of the handsheets can be studied to give an indication of the performance of CF as a reinforcement additive in the production of paper or tissue.This Standard is the third in a series on cellulose nanomaterials intended to serve as a foundation for the development of both Canadian and international standards to facilitate the introduction of cellulose nanomaterials into global markets. Other standards in the series on cellulose nanomaterials include CSA Z5100,Cellulose nanomaterials — Test methods for characterization and CSA Z5200, Cellulose nanomaterials — Blank detail specification.This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group.Scope:1.1This Standard describes methods for the preparation of low-basis weight handsheets of cellulose filaments (CF) and CF-reinforced pulp handsheets to be used for physical tests.1.2This Standard also covers the preparation of low-basis weight handsheets of cellulose microfibrils (CMF) and cellulose nanofibrils (CNF), and CMF- or CNF-reinforced pulp handsheets, provided that handsheets of acceptable quality can be obtained using the methods described.1.3This Standard does not cover the preparation of handsheets of CF, CMF, or CNF for optical tests.1.4In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the Standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.