ISO 7544:2024-滚动轴承清洁度试验和评定方法-国家数字标准馆

现行 ISO 7544:2024

到馆提醒

收藏跟踪

购买正版

Rolling bearings — Test and assessment methods for cleanliness 滚动轴承清洁度试验和评定方法

发布日期： 2024-09-26

                本文件规定了滚动轴承清洁度检查的程序和设备。它特别描述了测试方法和评估技术。
本文件适用于各类开式轴承和带盖轴承在润滑脂加注前的试验和评定，以及滚动轴承零件的试验和评定。
本文件不适用于直线运动滚动轴承。

This document specifies procedures and equipment for cleanliness inspections of rolling bearings. It describes, in particular, test methods and assessment techniques.
This document is applicable to the test and assessment of various types of open bearings and capped bearings before grease filling, as well as the test and assessment of rolling bearing parts.
This document is not applicable for linear motion rolling bearings.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 21.100.20轴承 - 滚动轴承

关联关系

研制信息

归口单位： ISO/TC 4

相似标准/计划/法规

GB/T 33624-2017

Rolling bearings—Test and assessment methods for cleanliness

GB/T 33624-2017

滚动轴承清洁度测量及评定方法
Rolling bearings—Test and assessment methods for cleanliness

滚动轴承清洁度评定方法
Rolling bearings—Assessment methods for cleanliness

JB/T 10560-2017

滚动轴承防锈油、清洗剂清洁度及评定方法标准
Rolling bearings-Cleanliness and its assessment methods of rust preventive oils and cleanser

JB/T 13353-2017

滚动轴承汽车轮毂轴承单元试验及评定方法
Rolling bearings-Test and assessment methods for automotive hub bearing units

GB/T 24607-2023

滚动轴承寿命可靠性试验及评定方法
Rolling bearings—Test and assessment for life and reliability

滚动轴承残磁及其评定方法标准
Rolling bearings-Residual magnetism and its assessment method

KS R 9161(2017 Confirm)

철도 차량 부품의 청정도 시험 방법
铁路车辆零件清洁度试验方法

철도 차량 부품의 청정도 시험방법
铁路车辆部件清洁度试验方法

滚动轴承零件表面粗糙度测量和评定方法
Rolling bearing parts-Methods for the measurement and assessment of surface roughness

BS ISO 21250-4-2020

Rolling bearings. Noise testing of rolling bearing greases-Test and evaluation method NQ
滚动轴承滚动轴承润滑脂的噪声测试

BS ISO 21250-3-2020

Rolling bearings. Noise testing of rolling bearing greases-Test and evaluation method MQ
滚动轴承滚动轴承润滑脂的噪声测试

BS ISO 21250-2-2020

Rolling bearings. Noise testing of rolling bearing greases-Test and evaluation method BQ+
滚动轴承滚动轴承润滑脂的噪声测试

Rolling Element Bearing Test Methods
滚动轴承试验方法

JB/T 10861-2008

滚动轴承钢球表面缺陷图册及评定方法
Rolling bearings-Atlas and the assessment methods for surface imperfections of steel balls

GB/T 32324-2015

滚动轴承圆度和波纹度误差测量及评定方法
Rolling bearings—Methods for the measurement and assessment of departure from roundness and waviness

KS B ISO 21250-2

구름 베어링 — 구름 베어링용 그리스의 소음 시험 — 제2부: BQ+ 시험과 평가 방법
滚动轴承.滚动轴承润滑脂的噪声试验.第2部分:试验和评定方法BQ+

GB/T 43617.3-2024

滚动轴承滚动轴承润滑脂噪声测试第3部分：测试和评估方法MQ
Rolling bearings—Noise testing of rolling bearing greases—Part 3:Test and evaluation method MQ

GB/T 43617.4-2024

滚动轴承滚动轴承润滑脂噪声测试第4部分：测试和评估方法NQ
Rolling bearings—Noise testing of rolling bearing greases—Part 4:Test and evaluation method NQ

GB/T 43617.2-2024

滚动轴承滚动轴承润滑脂噪声测试第2部分：测试和评估方法BQ+
Rolling bearings—Noise testing of rolling bearing greases—Part 2：Test and evaluation method BQ+

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

关于我们

查新颖性

查有效性

跟踪标准

比对标准

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统