1.1 本试验方法包括测定汽车发动机油是否均匀并将保持均匀，以及在经过规定的温度变化循环后是否与某些标准参考油混溶。该试验方法与FED–STD–791/3470.1中描述的均匀性和混溶性试验非常相似。 1.2 以国际单位制表示的数值应视为标准值。本标准不包括其他计量单位。 1.3 警告 -许多监管机构已将汞指定为一种危险物质，可导致严重的医疗问题。汞或其蒸汽已被证明对健康有害，并对材料具有腐蚀性。处理汞和汞时要小心- 包含产品。有关更多信息，请参阅适用的产品安全数据表（SDS）。当地或国家法律禁止销售汞或含汞产品，或两者兼有。用户必须确定其所在地销售的合法性。 1.4 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 5.1 重要的是，不同制造商的发动机机油应均匀且彼此可混溶，因为汽车发动机的操作员通常事先不知道当前在其应用中使用的机油的制造商，如果机油混合后不能保持均匀并正常工作，则可能会发生发动机故障。

1.1 This test method covers the determination if an automotive engine oil is homogeneous and will remain so, and if it is miscible with certain standard reference oils after being submitted to a prescribed cycle of temperature changes. This test method is very similar to the homogeneity and miscibility test described in FED–STD–791/3470.1. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 WARNING —Mercury has been designated by many regulatory agencies as a hazardous substance that can cause serious medical issues. Mercury, or its vapor, has been demonstrated to be hazardous to health and corrosive to materials. Use Caution when handling mercury and mercury-containing products. See the applicable product Safety Data Sheet (SDS) for additional information. The potential exists that selling mercury or mercury-containing products, or both, is prohibited by local or national law. Users must determine legality of sales in their location. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 It is important that engine oils from different manufacturers be homogeneous and miscible with each other, because operators of automotive engines often do not have prior knowledge of the manufacturer of the oil that is currently used in their application, and engine failure can occur if oils are combined that do not stay homogeneous and function properly.