1.1 本规范涵盖设计用于地面和航空运输的自支撑模压聚乙烯紧头滚筒，尺寸从5 gal（19 L）到55 gal（208 L）。 1.2 原始或回收聚乙烯塑料 2. 如果成品符合本规范的要求，则可以使用或其组合。 注1: 没有已知的ISO等效于本标准。 注2: 本标准旨在取代MIL-D-43703C。 1.3 以英寸-磅为单位的数值应视为标准值。括号中给出的值是到国际单位制的数学转换，仅供参考，不被视为标准值。 1.4 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。

1.1 This specification covers self supporting, molded polyethylene, tight head drums designed for surface and air shipment, ranging in size from 5 gal (19 L) to and including 55 gal (208 L). 1.2 Virgin or recycled polyethylene plastics 2 or combinations thereof can be used provided the finished product meets the requirements of this specification. Note 1: There is no known ISO equivalent to this standard. Note 2: This standard is intended to replace MIL-D-43703C. 1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are mathematical conversions to SI units that provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.