现行

KS R ISO 7651(2017 Confirm)

상용차와 승합차－1, 2 및 3형 교류 발전기 부착 치수
商用车辆和客车1、2和3型交流发电机的安装尺寸

2002-12-27

现行

KS R ISO 7651(2022 Confirm)

상용차와 승합차－1, 2 및 3형 교류 발전기 부착 치수
商用车辆和公共汽车－1、2和3型交流发电机的安装尺寸

2002-12-27

现行

ISO 7651-1991

Commercial vehicles and buses — Mounting dimensions for alternators of types 1, 2 and 3
商用车辆和公共汽车——1、2和3型交流发电机的安装尺寸

1991-04-25

现行

DIN ISO 7651

Commercial vehicles and buses; mounting dimensions for alternators of types 1, 2 and 3; identical with ISO 7651:1991
商用车辆和公共汽车；1、2和3型交流发电机的安装尺寸；与ISO 7651:1991相同

1993-09-01

现行

ISO 7650-1987

Commercial vehicles and buses — Mounting dimensions for starter motors of types 1, 2, 3 and 4
商用车辆和公共汽车——1、2、3和4型起动马达的安装尺寸

1987-07-30

现行

ISO 7650-1987/Amd 1-2001

Commercial vehicles and buses — Mounting dimensions for starter motors of types 1, 2, 3 and 4 — Amendment 1
商用车辆和客车.1 2 3和4型起动电机的安装尺寸.修改件1

2001-08-23

现行

KS B ISO 500-3(2020 Confirm)

농업용 트랙터 — 후방 동력취출장치 형식 1, 2, 3, 4 — 제3부: 주 PTO 치수, 스플라인 치수, PTO 위치
农业拖拉机1、2、3、4型后置动力输出装置第3部分:主动力输出轴尺寸和花键尺寸动力输出轴位置

2015-04-20

现行

ISO 500-3-2014

Agricultural tractors — Rear-mounted power take-off types 1, 2, 3 and 4 — Part 3: Main PTO dimensions and spline dimensions, location of PTO
农业拖拉机——后置动力输出类型1、2、3和4第3部分:主PTO尺寸和花键尺寸、PTO位置

2014-03-18

现行

BS ISO 500-3-2014

Agricultural tractors. Rear-mounted power take-off types 1, 2, 3 and 4-Main PTO dimensions and spline dimensions, location of PTO
农业拖拉机 后置式动力输出1、2、3和4型 主要PTO尺寸和花键尺寸 PTO位置

2014-04-30

现行

DIN ISO 7650

Commercial vehicles and buses; mounting dimensions for starter motors of types 1, 2, 3 and 4; identical with ISO 7650:1987
商用车辆和公共汽车；1、2、3和4型起动马达的安装尺寸；与ISO 7650:1987相同

1992-08-01

现行

KS B ISO 500-1(2020 Confirm)

농업용 트랙터 — 후방 동력취출장치 형식 1, 2, 3, 4 — 제1부: 주커버와 안전 영역에 대한 일반 제원, 안전요건, 치수
农业拖拉机1、2、3和4型后置动力输出轴第1部分:总规范、安全要求、主护罩和间隙区尺寸

2015-04-20

现行

GB/T 1592.1-2016

农业拖拉机 后置动力输出轴 1、2、3和4型 第1部分：通用要求、安全要求、防护罩尺寸和空隙范围
Agricultural tractors—Rear-mounted power take-off types 1, 2, 3 and 4—Part 1: General specifications，safety requirements，dimensions for master shield and clearance zone

2016-02-24

现行

ISO 500-1-2014

Agricultural tractors — Rear-mounted power take-off types 1, 2, 3 and 4 — Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone
农业拖拉机——后置式动力输出类型1、2、3和4第1部分:一般规范、安全要求、主护罩和间隙区的尺寸

2014-03-18

现行

BS ISO 500-1-2014

Agricultural tractors. Rear-mounted power take-off types 1, 2, 3 and 4-General specifications, safety requirements, dimensions for master shield and clearance zone
农业拖拉机 后置式动力输出1、2、3和4型 总屏蔽和净空区的一般规范、安全要求、尺寸

2014-04-30

现行

KS B ISO 500-2

농업용 트랙터 후방 동력취출 장치 형식 1, 2, 3 제 제2부부: 협폭 트랙터트랙터, 주커버와 안전 영역
农业拖拉机.1、2和3型后置动力输出装置.第2部分:窄履带拖拉机.主护罩和间隙区的尺寸

2022-12-23

现行

KS B ISO 500-2(2017 Confirm)

농업용 트랙터-후방 동력취출장치 형식 1,2,3-2부:협폭 트랙터, 주커버와 안전 영역
农用拖拉机1、2和3型后置动力输出轴第2部分:窄履带拖拉机主护罩和间隙区尺寸

2007-07-19

现行

ISO 500-2-2004

Agricultural tractors — Rear-mounted power take-off types 1, 2 and 3 — Part 2: Narrow-track tractors, dimensions for master shield and clearance zone
农业拖拉机——后置式动力输出类型1、2和3第2部分:窄履带拖拉机 主护罩和间隙区尺寸

2004-09-07

现行

CAN/CSA M5000.1-07

Agricultural Tractors - Rear-Mounted Power Take-off Types 1,2, and 3 - Part 1: General Specifications, Safety Requirements, Dimensions for Master Shield and Clearance Zone
农业拖拉机1、2和3型后置动力输出装置第1部分:通用规范、安全要求、主护罩和间隙区尺寸

2007-04-01