组合机床三坐标加工单元 第1部分：卧式三坐标加工单元 精度检验
Modular machine coordinate machining units-Part 1: Horizontal coordinate machining units-Testing of the accuracy

2019-05-02

수직 축 높이 고정 테이블형 고정밀 터릿및 단축 좌표 드릴링 및 보링 머신의 시험 조건 — 정확정밀도 시험 — 제2부: 테이블 이동형 문형 머신
具有垂直主轴的高精度转塔和单主轴坐标钻镗床测试条件 - 精度测试 - 第2部分:带移动台的门式机床

2019-12-30

고정 높이 테이블을 갖는 수직형 고정밀 터릿과 단일 스핀들 좌표 드릴링 및 보링 머신의 시험 조건 — 정확정밀도 시험 — 제2부: 테이블 이동형 문형 머신
带垂直主轴固定高度工作台的高精度转塔和单轴坐标钻床的试验条件.精度试验.第2部分:带移动工作台的龙门式钻床

2022-12-30

High accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle. Test conditions. Testing of the accuracy. Part 2: Portal type machines with moving table.
高精度转台和单轴坐标钻床和镗床 带垂直主轴的固定高度工作台 测试条件 测试的准确性 第2部分:带移动工作台的门式机器

2004-04-16

Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle — Testing of the accuracy — Part 2: Portal type machines with moving table
带立式主轴固定高度工作台的高精度转台和单轴坐标钻床和镗床的试验条件——精度测试第2部分:带移动工作台的门式机器

2000-07-20

组合机床通用部件 第2部分：多轴转塔动力箱 参数和尺寸
Modular units for modular machine tools - part 2:Multi-spindle turret power case - Parameters and dimensions

2015-04-30

수직 스핀들과 고정 테이블을 갖는 고정밀 터릿 및 단축 좌표 드릴링과 보링 머신의 검사 조건 — 정확정밀도 검사 —제1부: 싱글 칼럼형 머신
具有垂直主轴的高精度转塔和单主轴坐标钻镗床的测试条件 - 精度测试 - 第1部分:单列式机床

2020-11-17

High accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle. Test conditions. Testing of the accuracy. Part 1: Single colummn type machines.
高精度转台和单轴坐标钻床和镗床 带垂直主轴的固定高度工作台 测试条件 测试的准确性 第1部分:单柱式机器

2004-04-16

Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle — Testing of the accuracy — Part 1: Single column type machines
带立式主轴固定高度工作台的高精度转台和单轴坐标钻床和镗床的试验条件——精度测试第1部分:单柱型机器

2000-07-20

Acceptance Test and Reverification Test for Coordinate Measuring Machines (CMMs) - Part 2: CMMs Used for Measuring Linear Dimensions (Technical Report)
坐标测量机的验收试验和再鉴定试验第2部分:用于测量线性尺寸的坐标测量机（技术报告）

2008-07-11

제품의 형상 명세(GPS) — 좌표측정기 (CMM)의 인수 시험과 재검증 시험 —제2부: 치수측정용 좌표측정기
坐标测量机（CMM）的几何产品规格（GPS）验收和再验证测试第2部分用于测量线性尺寸的CMM

2020-12-31

Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 2: CMMs used for measuring linear dimensions
产品几何量技术规范（GPS）坐标测量机（CMM）的验收和再验证试验第2部分:用于测量线性尺寸的CMM

2013-01-01

产品几何技术规范（GPS） 坐标测量机的验收检测和复检检测 第2部分: 用于测量线性尺寸的坐标测量机
Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 2: CMMs used for measuring linear dimensions

2017-11-01

Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 2: CMMs used for measuring linear dimensions
几何产品规范（GPS）——坐标测量机（CMM）的验收和再鉴定试验第2部分:用于测量线性尺寸的CMM

2009-11-27

MODULAR UNITS FOR MACHINES TOOLS. WORKHOLDING PALLETS. PART 2: WORKHOLDING PALLETS OF NOMINAL SIZE GREATER THAN 800 mm.
机床用模块化装置 工作托盘 第2部分:标称尺寸大于800 mm的工件托板

1992-12-30

机床通用部件 工件随行托板 第2部分：名义尺寸大于800mm的工件随行托板
Modular units for machine tools - Workholding pallets - Part 2: Workholding pallets of nominal size greater than 800 mm

2010-11-10

Modular units for machine tools — Workholding pallets — Part 2: Workholding pallets of nominal size greater than 800 mm
机床用模块化装置——工件固定托盘第2部分:公称尺寸大于800 mm的工件固定托盘

1990-08-23

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009)
产品几何技术规范（GPS）.坐标测量机（CMM）的验收和再认证试验.第2部分:用于测量线性尺寸的CMM（ISO 10360-2-2009）

2010-12-15

Модульный принцип построения механических конструкций для радиоэлектронных средств. Часть 2. Секционный стандарт. Координационные размеры интерфейса для несущих конструкций с шагом 25 мм. Раздел 2. Детальный стандарт. Размеры блочных каркасов, шасси, объединительных плат, передних панелей и вставных блоков
用于发展无线电设备机械结构的模块化顺序 部分标准 25 mm设备实践的界面协调尺寸 细节标准 子架 底盘 背板 前面板和插件单元的尺寸

Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification; interface coordination dimensions for the 25 mm equipment practice; section 2: Detail specification; dimensions for subracks, chassis, backplanes, front panels and plug-in units (IEC 60917-2-2:1994); German version EN 60917-2-2:1996
电子设备用机械结构开发的模块化顺序.第2部分:分规范；25mm设备实践的接口协调尺寸；第2节:详细规范；机架、机箱、背板、前面板和插件的尺寸

1996-06-01