现行

KS M 3019

플라스틱의 전단 시험방법
测试方法塑料由冲压工具剪切强度

2018-12-14

现行

HG/T 3839-2006

塑料剪切强度试验方法 穿孔法
Testing methods for shear strength of plastics by punch tool

2006-07-27

现行

KS M 3019(2023 Confirm)

플라스틱의 전단 시험방법
用冲压工具测定塑料剪切强度的试验方法

2018-12-14

现行

JIS K 7214-1985

Testing methods for shear strength of plastics by punch tool
用冲头工具测定塑料剪切强度的试验方法

1985-01-01

现行

ASTM D732-24

Standard Test Method for Shear Strength of Plastics by Punch Tool
用冲压工具测定塑料剪切强度的标准试验方法

2024-08-01

现行

GOST R 57860-2017

Композиты полимерные. Определение прочности при сдвиге методом пробоя
聚合物复合材料 用冲头工具法测定剪切强度

现行

GOST 17302-1971

Пластмассы. Метод определения прочности на срез
塑料 剪切强度试验方法

现行

BS 2782-3-METHODS 340A AND 340B-1978

Methods of testing plastics. Mechanical properties. Determination of shear strength of moulding material. Determination of shear strength of sheet material
塑料的试验方法 机械性能 模塑材料剪切强度的测定 板材剪切强度的测定

1978-06-30

现行

KS M 3385(2020 Confirm)

유리 섬유 강화 플라스틱의 가로 전단 시험 방법
玻璃纤维增​​强塑料横向剪切强度试验方法

2004-07-16

现行

BS 2782-3-METHOD 341A-1977

Methods of testing plastics. Mechanical properties-Determination of apparent interlaminar shear strength of reinforced plastics
塑料的试验方法 机械性能 增强塑料表观层间剪切强度的测定

1977-04-29

现行

ASD-STAN prEN 6060

Fibre reinforced plastics - Test method - Determination of the tensile single lap shear strength
纤维增强塑料.试验方法.拉伸单搭接剪切强度的测定

1995-12-15

现行

ASTM D3914-02(2016)

Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod
拉挤玻璃增强塑料棒的平面剪切强度的标准试验方法

2016-04-01

现行

ASTM D3163-01(2023)

Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
通过拉伸载荷测定剪切中粘性粘结刚性塑料搭接剪切接头强度的标准试验方法

2023-01-01

现行

ASTM D3164-03(2017)

Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
通过张力加载剪切粘合的塑料夹层三明治接头的强度性能的标准测试方法

2017-04-01

现行

BS EN 2377-1989

Specification for glass fibre reinforced plastics. Test method. Determination of apparent interlaminar shear strength
玻璃纤维增强塑料规范 测试方法 表观层间剪切强度的测定

1989-11-30

现行

JIS K 7092-2005

Test method for interlaminar shear strength of carbon fibre reinforced plastic by double-notch specimen
用双缺口试样测定碳纤维增强塑料层间剪切强度的试验方法

2005-01-01

现行

ASTM D4475-21

Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method
用短梁法测定拉挤增强塑料棒的表观水平剪切强度的标准试验方法

2021-07-01

现行

JIS K 7078-1991

Testing method for apparent interlaminar shear strength of carbon fiber reinforced plastics by three point loading method
用三点加载法测定碳纤维增强塑料表观层间剪切强度的试验方法

1991-01-01

现行

BS EN ISO 14129-1998

Fibre-reinforced plastic composites. Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength by the ± 45° tension test method
纤维增强塑料复合材料 通过$0P 45度拉伸试验方法确定平面内剪切应力/剪切应变响应 包括平面内剪切模量和强度

1998-04-15

现行

KS M ISO 14129

섬유강화 플라스틱 복합재료－±45˚ 인장 시험법에 의한 면내 전단 탄성률, 강도 및 전단 응력/전단 변형률 응답의 측정
纤维增强塑料复合材料－用±45°拉伸试验方法测定面内剪切应力/剪切应变响应 包括面内剪切模量和强度

2016-12-27