BS EN ISO 12217-1:2017规定了评估完整（即。 （未损坏的）船只。还包括易受沼泽影响的船只的漂浮特性。使用ISO 12217的本部分对稳定性和浮力特性进行评估，将使船只能够 被分配到适合其设计和最大总荷载的设计类别（a、B、C或D）。ISO 12217的本部分主要适用于由人力或机械动力驱动的船舶 6米至24米船体长度。然而，它也适用于6米以下的船只，如果它们没有达到 ISO 12217-3中规定的所需设计类别，它们有盖板和快速排水凹槽 符合ISO 11812标准。关于可居住多体船，ISO 12217的本部分包括对 反转、可行逃生方式的定义以及反转浮选的要求。 交叉引用:ISO 6185-4:2011ISO 3864-1ISO 15085ISO 12217-3ISO 12217-2ISO 15083ISO 14946ISO 12216ISO 10240ISO 9093-1ISO 9093-2ISO 8666ISO 12217-3:2015ISO 2896ISO 12217-2:2015ISO 11812IMO决议MSC。81（70）ISO 7010EUISO 6185ASTM F1321-92ISO 6185（所有部分）购买本文件时提供的所有现行修订版均包含在购买本文件中。

BS EN ISO 12217-1:2017 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of boats susceptible to swamping are also encompassed.The evaluation of stability and buoyancy properties using this part of ISO 12217 will enable the boat to be assigned to a design category (A, B, C or D) appropriate to its design and maximum total load.This part of ISO 12217 is principally applicable to boats propelled by human or mechanical power of 6 m up to 24 m hull length. However, it can also be applied to boats of under 6 m if they do not attain the desired design category specified in ISO 12217-3 and they are decked and have quick-draining recesses which comply with ISO 11812.In relation to habitable multihulls, this part of ISO 12217 includes assessment of susceptibility to inversion, definition of viable means of escape and requirements for inverted flotation.Cross References:ISO 6185-4:2011ISO 3864-1ISO 15085ISO 12217-3ISO 12217-2ISO 15083ISO 14946ISO 12216ISO 10240ISO 9093-1ISO 9093-2ISO 8666ISO 12217-3:2015ISO 2896ISO 12217-2:2015ISO 11812IMO Resolution MSC.81(70)ISO 7010EUISO 6185ASTM F1321-92ISO 6185 (all parts)All current amendments available at time of purchase are included with the purchase of this document.