现行

GB/T 12359-2008

梯形螺纹 极限尺寸
Metric trapezoidal screw threads - Limits of sizes

2008-07-30

现行

KS B 0219(2023 Confirm)

미터 사다리꼴 나사 허용 한계 치수 및 공차
米制梯形螺纹尺寸公差限值

2008-06-03

现行

KS B 0219(2018 Confirm)

미터 사다리꼴 나사 허용 한계 치수 및 공차
尺寸公差米制梯形螺纹LIMIT

2008-06-03

现行

JIS B 0218-1980

Limit of sizes and tolerances for metric trapezoidal screw threads
米制梯形螺纹的尺寸和公差限值

1980-01-01

现行

DIN 103-5

ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 8 to 100 mm Nominal Diameter
ISO公制梯形螺纹；标称直径为8至100 mm的螺母螺纹的极限尺寸

1972-10-01

现行

JIS B 0217-2-2013

ISO metric trapezoidal screw threads -- Tolerances -- Part 2: Limits of sizes for external and internal screw thread
ISO公制梯形螺纹公差第2部分:外螺纹和内螺纹尺寸限值

2013-01-01

现行

DIN 103-8

ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 105 to 300 mm Nominal Diameter
ISO公制梯形螺纹；公称直径为105至300 mm的螺栓螺纹的极限尺寸

1972-10-01

现行

DIN 103-7

ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 8 to 100 mm Nominal Diameter
ISO公制梯形螺纹；标称直径为8至100 mm的螺栓螺纹的极限尺寸

1972-10-01

现行

BS 3643-2-2007

ISO metric screw threads-Specification for selected limits of size
ISO公制螺纹

2014-06-30

现行

UNE 17703-2004

ISO general purpose metric screw threads. Selected sizes for screws, bolts and nuts.
ISO通用公制螺纹 螺钉、螺栓和螺母的选定尺寸

2004-12-31

现行

ISO 262-2023

ISO general purpose metric screw threads — Selected sizes for bolts, screws, studs and nuts
ISO通用公制螺纹-螺栓、螺钉、螺柱和螺母的选定尺寸

2023-04-20

现行

DIN ISO 262

ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts (ISO 262:1998)
ISO通用公制螺纹螺钉、螺栓和螺母的选定尺寸（ISO 262-1998）

1999-11-01

现行

JIS B 0205-3-2001

ISO general purpose metric screw threads -- Part 3: Selected sizes for screws, bolts and nuts
ISO通用公制螺纹第3部分:螺钉、螺栓和螺母的选择尺寸

2001-01-01

现行

BS ISO 965-2-1998+A1-2021

ISO general purpose metric screw threads. Tolerances-Limits of sizes for general purpose external and internal screw threads. Medium quality
ISO通用公制螺纹 公差

2021-07-26

现行

UNE 17708-2002

ISO general purpose metric screw threads. Tolerances. Limits of sizes for general purpose external and internal screw threads. Medium quality.
ISO通用公制螺纹 公差 通用外螺纹和内螺纹的尺寸限制 中等质量

2002-11-26

现行

BS ISO 965-5-1998+A1-2021

ISO general purpose metric screw threads. Tolerances-Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
ISO通用公制螺纹 公差

2021-07-26

现行

JIS B 0209-2-2001

ISO general purpose metric screw threads -- Tolerances -- Part 2: Limits of sizes for general purpose external and internal screw threads -- Medium quality
ISO通用公制螺纹公差第2部分:通用外螺纹和内螺纹尺寸限值中等质量

2001-01-01

现行

JIS B 0209-5-2001

ISO general purpose metric screw threads -- Tolerances -- Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
ISO通用米制螺纹公差第5部分:镀锌前最大公差位置为h的热浸镀锌外螺纹与内螺纹配合的尺寸限制

2001-01-01

现行

ISO 965-5-1998

ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
ISO通用公制螺纹——公差SPART 5:与热浸镀锌外螺纹配合的内螺纹尺寸限制 镀锌前最大公差位置为h

1998-12-20

现行

GOST ISO 965-5-2015

Основные нормы взаимозаменяемости. Резьбы метрические ИСО общего назначения. Допуски. Предельные размеры внутренних резьб, сопрягаемых с горячеоцинкованными наружными резьбами, соответствующими до нанесения покрытия полям допусков с основными отклонениями до h включительно
互换性的基本规范 ISO通用公制螺纹 公差 内螺纹尺寸的限制与热镀锌外螺纹配合 镀锌前最大公差位置h

2015-08-27