本文件介绍了Euraxes项目中有关车辆设计的知识阶段 车轴，以及需要采取的进一步措施。 这是支持: -定义要考虑的荷载；-描述使用有限元的应力计算方法和相关的验证过程；-规定计算中假定的最大容许应力和拟采用的安全系数 习惯于交叉引用:EN 13260EN 13103-1EN 13261ISO EN 1993EN 1990购买本文件时可获得的所有现行修订均包含在购买本文件中。

This document presents the stage of knowledge resulting from the Euraxles project about the design of the axle, and further steps to be taken. It is the support: — to define the loads to be taken into account;— to describe the stress calculation method using finite elements and the validation processes associated;— to specify the maximum permissible stresses to be assumed in calculations and the safety factors to be used.Cross References:EN 13260EN 13103-1EN 13261ISO EN 1993EN 1990All current amendments available at time of purchase are included with the purchase of this document.