IEC 60512-15-2:20 18当详细（产品）规范要求时，IEC 60512的这一部分用于测试技术委员会48范围内的连接器。当在详细（产品）规范中指定时，它也可用于类似设备。 本文件的目的是详细描述一种标准测试方法，以评估连接器外壳内的连接器插入件的保持系统在正常使用期间可能遇到的轴向力，即，在连接器插入件不从连接器外壳移出的情况下，承受进入/从配合配对件的最高插入力和拔出力的有效性。 本文件中详述的试验方法是IEC 60512-15-3中详述的试验方法的配套方法 第二版取消并取代了2008年出版的第一版。本版构成技术修订版。 本版相对于上一版包括以下重大技术变化:增加了适用于密封连接器试验的试验方法B（压力法）。此版本反映了IEC 60512-1-101空白详细规范。

IEC 60512-15-2:2018 This part of IEC 60512, when required by the detail (product) specification, is used for testing connectors within the scope of technical committee 48. It may also be used for similar devices when specified in a detail (product) specification.
The object of this document is to detail a standard test method to assess the effectiveness of the retaining system of a connector insert within a connector housing to withstand axial forces likely to be encountered during normal use, i.e. the highest insertion and withdrawal forces into/from a mating counterpart, without the connector insert being dislodged from the connector housing.
The test method detailed in this document is a companion to the one detailed in IEC 60512-15-3
This second edition cancels and replaces the first edition, published in 2008. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition: the test method B (pressure method) suitable for testing hermetic connector has been added. This edition reflects IEC 60512-1-101, Blank detail specification.