BS EN ISO 374-2:2019-防危险化学品和微生物的防护手套-国家数字标准馆

现行 BS EN ISO 374-2:2019

到馆提醒

收藏跟踪

购买正版

Protective gloves against dangerous chemicals and micro-organisms-Determination of resistance to penetration 防危险化学品和微生物的防护手套

发布日期： 2019-11-05

本文件规定了防护手套抗渗透性的试验方法
危险化学品和/或微生物。交叉引用:ISO 374-1ISO 2859（所有部分）购买本文件时可获得的所有现行修订均包含在购买本文件中。

This document specifies a test method for the penetration resistance of gloves that protect against
dangerous chemicals and/or micro-organisms.Cross References:ISO 374-1ISO 2859 (all parts)All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

BS EN ISO 374-5-2016

Protective gloves against dangerous chemicals and micro-organisms-Terminology and performance requirements for micro-organisms risks
防危险化学品和微生物的防护手套

BS EN ISO 374-4-2019

Protective gloves against dangerous chemicals and micro-organisms-Determination of resistance to degradation by chemicals
防危险化学品和微生物的防护手套

BS EN ISO 374-1-2016+A1-2018

Protective gloves against dangerous chemicals and micro-organisms-Terminology and performance requirements for chemical risks
防危险化学品和微生物的防护手套

手部防护化学品及微生物防护手套
Hand protection - Protective gloves against chemicals and micro-organisms

Protective gloves against dangerous chemicals and micro-organisms — Part 5: Terminology and performance requirements for micro-organisms risks
危险化学品和微生物防护手套第5部分:微生物风险术语和性能要求

화학물질 및 미생물에 대한 보호 장갑 —제5부: 미생물 위험성에 대한 용어와 요구 성능
危险化学品和微生物防护手套.第5部分:微生物风险术语和性能要求

Protective gloves against dangerous chemicals and micro-organisms — Part 4: Determination of resistance to degradation by chemicals
危险化学品和微生物防护手套第4部分:耐化学品降解性的测定

Protective gloves against dangerous chemicals and micro-organisms — Part 2: Determination of resistance to penetration
防护手套防止危险化学品和微生物 - 第2部分:耐渗透性的测定

Protective gloves against dangerous chemicals and micro-organisms — Part 1: Terminology and performance requirements for chemical risks
危险化学品和微生物防护手套第1部分:化学品风险术语和性能要求

화학물질 및 미생물에 대한 보호 장갑 —제1부: 화학물질 위험성에 대한 용어와 요구 성능
危险化学品和微生物防护手套.第1部分:化学危险术语和性能要求

DIN EN ISO 374-5

Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements for micro-organisms risks (ISO 374-5:2016)
危险化学品和微生物防护手套第5部分:微生物风险术语和性能要求（ISO 374-5-2016）

AS/NZS 2161.10.3-2005

Occupational protective gloves, Part 10.3: Protective gloves against chemicals and micro-organisms - Determination of resistance to permeation by chemicals
职业防护手套第10.3部分:化学品和微生物防护手套.耐化学品渗透性的测定

AS/NZS 2161.10.2-2005

Occupational protective gloves, Part 10.2: Protective gloves against chemicals and micro-organisms - Determination of resistance to penetration
职业防护手套第10.2部分:化学品和微生物防护手套.抗渗透性的测定

AS/NZS 2161.10.1-2005

Occupational protective gloves, Part 10.1: Protective gloves against chemicals and micro-organisms - Terminology and performance requirements
职业防护手套第10.1部分:化学品和微生物防护手套术语和性能要求

DIN EN ISO 374-4

Protective gloves against dangerous chemicals and micro-organisms - Part 4: Determination of resistance to degradation by chemicals (ISO 374-4:2019)
危险化学品和微生物防护手套第4部分:耐化学品降解性的测定；德文版EN ISO 374-4:2019

UNE-EN 374-3-2004

Protective gloves against chemicals and micro-organisms - Part 3: Determination of resistance to permeation by chemicals
防化学品和微生物的防护手套.第3部分:耐化学品渗透性的测定

GOST ISO 374-5-2020

Система стандартов безопасности труда. Средства индивидуальной защиты рук. Перчатки для защиты от химических веществ и микроорганизмов. Часть 5. Терминология и требования к эксплуатационным характеристикам перчаток для защиты от микроорганизмов
职业安全标准体系手的个人保护装置防化学品和微生物的防护手套第五部分微生物防护手套术语和性能要求

DIN EN ISO 374-2

Protective gloves against dangerous chemicals and micro-organisms - Part 2: Determination of resistance to penetration (ISO 374-2:2019)
危险化学品和微生物防护手套第2部分:耐渗透性的测定

Protective gloves against chemicals and micro-organisms - Part 1: Terminology and performance requirements
化学品和微生物防护手套.第1部分:术语和性能要求；德文版EN 374-1:2003

UNE-EN 374-2-2004

Protective gloves against chemicals and micro-organisms - Part 2: Determination of resistance to penetration
防化学品和微生物的防护手套.第2部分:耐渗透性的测定

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统