冻结装置试验方法 第3部分：隧道冻结装置试验方法
Test method for the freezing plant Part 3:Test method for the tunnel freezer

2006-07-10

冻结装置试验方法 第4部分：流态冻结装置试验方法
Test method for the freezing plant Part 4:Test method for the fluidized bed freezer

2006-07-10

冻结装置试验方法 第1部分：总则
Test method for the freezing plant Part 1:General rules

2006-07-10

风力发电机组板式冷却器第2部分：试验方法
Plate cooler for wind turbine generator Part 2:Test method

2016-08-16

天然石材试验方法 第2部分：干燥、水饱和、冻融循环后弯曲强度试验
Test methods for natural stone—Part 2:Determination of dry,wet and after freezing flexural strength

2020-03-06

Plate loading test of soils by means of dynamic plate. Part 2: Rigid plate, diameter 2r=300 mm, Method 2
采用动态平板法对土壤进行平板荷载试验 第2部分:刚性板 直径2r=300 mm 方法2

2008-07-30

Testing methods for paints -- Part 2: Characteristics and stability of paints -- Section 3: Viscosity (Corn and plate methods)
涂料试验方法第2部分:涂料的特性和稳定性第3节:粘度（玉米法和平板法）

2014-01-01

Fibre-reinforced plastics — Methods of producing test plates — Part 2: Contact and spray-up moulding
纤维增强塑料——试板Spart 2的生产方法:接触成型和喷射成型

2001-03-29

纤维增强塑料 试验板制备方法 第2部分：接触和喷射模塑
Fibre-reinforced plastics - Methods of producing test plates - Part 2: Contact and spray-up moulding

2011-12-30

Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 2: Performance of test
航空航天系列.金属材料的试验方法.棒材、板材、锻坯和锻件的超声波检验.第2部分:试验性能

1996-01-31

Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 2: Performance of test; German and English version EN 4050-2:2012
航空航天系列.金属材料的试验方法.棒材、板材、锻坯和锻件的超声波检验.第2部分:试验性能；德语和英语版本EN 4050-2:2012

2012-12-01

Solar thermal electric plants - Part 5-2: Systems and components - General requirements and test methods for large-size linear Fresnel collectors
太阳能热电厂第5-2部分:系统和部件大型线性菲涅耳收集器的一般要求和试验方法

2022-05-10

Solar thermal electric plants - Part 3-2: Systems and components - General requirements and test methods for large-size parabolic-trough collectors
太阳能热电厂.第3-2部分:系统和部件.大型抛物线槽集热器的一般要求和试验方法

2018-07-10

压水堆核电厂设施设备防护涂层规范 第2部分：涂层系统在模拟设计基准事故条件下的评价试验方法
Specifications for protective coatings used in pressurized water reactor nuclear power plants-Part 2:Standard test method for evaluating coatings at simulated design basis acciden(DBA)conditions

2012-01-06

Solar thermal electric plants - Part 3-2: Systems and components - General requirements and test methods for large-size parabolic-trough collectors (IEC 62862-3-2:2018); German version EN IEC 62862-3-2:2018
太阳能热电厂.第3-2部分:系统和部件.大型抛物面槽集热器的一般要求和试验方法（IEC 62862-3-2-2018）；德国版本EN IEC 62862-3-2:2018

2019-06-01