1.1 本消费者安全规范规定了性能要求、测试方法和标记要求，以促进安全使用床头枕。 1.2 本消费者安全规范旨在最大限度地降低婴儿因正常使用和合理可预见的滥用床边睡眠器而受到伤害的风险。 1.3 本消费者安全性能规范涵盖旨在为约5个月大的婴儿提供睡眠空间的产品（或当儿童开始用手和膝盖俯卧撑时）。这些产品旨在固定在成人床的侧面，以使婴儿在成人附近睡觉。 1.4 在本消费者安全规范批准日期之后生产的床头枕不得通过标签或其他方式表明符合本规范，除非其符合本规范中包含的所有要求。 1.5 本消费者安全性能规范不旨在解决儿童或儿童护理提供者对产品的更改或不合理滥用或误用导致的事故和伤害。 1.6 以英寸-磅单位表示的值应视为标准值。括号中给出的值是对SI单位的数学转换，仅供参考，不被视为标准值。 1.7 以下预防性警告仅适用于测试方法部分，第节 6. 本消费者安全性能规范。本标准可能涉及危险材料、操作和设备的使用。 本标准并不旨在解决与其使用相关的所有安全问题（如有）。 本标准的使用者有责任在使用前建立适当的安全、健康和环境实践，并确定监管限制的适用性。 1.8 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《国际标准、指南和建议制定原则决定》中确立的国际公认标准化原则制定的。

1.1 This consumer safety specification establishes performance requirements, test methods, and marking requirements to promote safe use of bedside sleepers. 1.2 This consumer safety specification is intended to minimize the risk of injury to an infant from the normal use and reasonably foreseeable misuse of a bedside sleeper. 1.3 This consumer safety performance specification covers products intended to provide sleeping space for an infant up to approximately 5 months of age (or when child begins to push up on hands and knees). These products are intended to be secured to the side of an adult bed for the purpose of having a baby sleep in close proximity to an adult. 1.4 No bedside sleeper produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with the specification unless it complies with all of the requirements contained herein. 1.5 This consumer safety performance specification is not intended to address incidents and injuries resulting from alteration or unreasonable abuse or misuse of the product by a child or child care provider. 1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.7 The following precautionary caveat pertains only to the test method portion, Section 6 of this consumer safety performance specification. This standard may involve the use of hazardous materials, operations and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.