1.1 本试验方法涵盖了带有通道安装系统的滑雪板的要求和试验方法，在通道安装系统上，通过可拆卸的插入件和螺钉将绑定件连接到板上。 1.2 本试验方法不适用于质量小于25公斤的儿童滑雪板。它包含了滑雪板、捆绑和固定装置制造商关于捆绑安装区域的尺寸、测试和其他规范的数据。 1.3 对于带有固定插件的滑雪板，请参见ISO 10958-2。 1.4 以国际单位制表示的值应被视为标准值。本标准不包括其他计量单位。 1.5 本标准并不旨在解决与其使用相关的所有安全问题（如果有的话）。本标准的使用者有责任在使用前建立适当的安全、健康和环境实践，并确定监管限制的适用性。 1.6 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。 =====意义和用途====== 4.1 本试验方法旨在评估使用过程中与滑雪板衬垫的结合保持强度。该测试方法也可用于比较不同材料和设计的耐久性。该测试方法参考了ISO 10958-2，该标准被认为对滑雪板的验收测试插件保持力是令人满意的。

1.1 This test method covers the requirements and test method for snowboards with channel-mounting systems on which bindings are attached to the board by means of a removable insert and screws. 1.2 This test method does not apply to snowboards for children with a mass less than 25 kg. It contains data for the manufacturer of snowboards, bindings, and retention devices concerning dimensions, tests, and other specifications for the binding mounting area. 1.3 For snowboards with fixed inserts, see ISO 10958-2. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 This test method is intended for use in evaluating the binding to snowboard insert retention strength resulting from use. This test method may also be used to compare the durability of different materials and designs. This test method references ISO 10958-2, which is considered satisfactory for acceptance testing insert retention for snowboards.