更新#1作为通知发布，这现在是加拿大的国家标准。1.范围1。1本标准适用于根据《加拿大电气规范》第I.1.2部分的规定，用于家庭、商业或工业用途的标称系统电压不超过600 V的电池充电器。本标准适用于:（a）室内和室外使用的便携式、移动式和固定式电池充电器；（b） 室内用固定电池充电器；（c） 如第7条所述，特殊应用（如轮椅和其他医疗应用）的电池充电器；（d） 如第8条所述，拟永久安装在船上的船用电池充电器；和（e）用于特殊充电的无变压器非隔离电池充电器- 本标准第9.1.3条中所述的用途电池组不适用于:（a）电池充电器不是一个完整的组件，需要在最终产品中安装才能符合本标准的要求；（b） 如CSA标准CAN/CSA-C22所述，具有超低电压（ELV）2级输出的直接插入式电池充电器或线连接电池充电器。2第223号；和（c）电池充电器，用于:（i）驱动离心泵的内燃机；（ii）在码头、船坞或其他海上应用中，而非拟永久安装在船上的应用；或（iii）在消防信号系统中。

Update #1 was published as notification that this is now a National Standard of Canada.1. Scope1.1 This Standard applies to battery chargers for use on nominal system voltages not exceeding 600 V intended for household, commercial, or industrial use in accordance with the rules of the Canadian Electrical Code, Part I.1.2 This Standard applies to: (a) portable, mobile, and stationary battery chargers for indoor and outdoor use; (b) fixed battery chargers for indoor use; (c) battery chargers for special applications such as wheelchairs and other medical applications, as covered in Clause 7; (d) marine battery chargers intended to be permanently installed on a boat, as covered in Clause 8; and (e)transformerless nonisolated battery chargers for charging special-purpose battery packs, as covered in Clause 9.1.3 This Standard does not apply to: (a) battery chargers that are not a complete assembly and that depend on installation in an end product to comply with the requirements of this Standard; (b) direct plug-in battery chargers or cord-connected battery chargers having an extra-low-voltage (ELV) Class 2 output, as covered by CSA Standard CAN/CSA-C22.2 No. 223; and (c) battery chargers for use with: (i) an internal combustion engine driving a centrifugal pump; (ii) in a marina, boatyard, or other marine applications other than those intended for permanent installation on a boat; or (iii) in a fire-protection signalling system.