首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ASTM C317/C317M-24
到馆提醒
收藏跟踪
购买正版
Standard Specification for Gypsum Concrete 石膏混凝土标准规范
发布日期: 2024-04-01
1.1 本规范涵盖了工厂混合石膏混凝土,主要由煅烧石膏和合适的骨料组成,只需要在施工现场加水。石膏混凝土用于现浇屋顶板或楼板的施工。根据抗压强度和密度,分为两类。 1.2 以英寸磅单位或国际单位制表示的数值应单独视为标准。每个系统中规定的值可能不是完全相等的;因此,每个系统应独立使用。 将两个系统的值结合起来可能会导致不符合标准。 1.3 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。
1.1 This specification covers mill-mixed gypsum concrete, consisting essentially of calcined gypsum and suitable aggregate, requiring the addition of water only at the job site. Gypsum concrete is intended for use in the construction of poured-in-place roof decks or slabs. Two classes, based on the compressive strength and density, are covered. 1.2 The values stated in either inch-pound units or SI units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
分类信息
关联关系
研制信息
归口单位: C11.01
相似标准/计划/法规
现行
ASTM C472-20
Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters, and Gypsum Concrete
石膏 石膏和石膏混凝土的物理试验标准试验方法
2020-04-01
现行
ASTM C956-24
Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete
现浇钢筋石膏混凝土安装标准规范
2024-05-01
现行
ASTM C22/C22M-00(2021)
Standard Specification for Gypsum
石膏标准规格
2021-04-01
现行
KS F 3507
석고 플라스터
石膏灰泥的标准规范
2018-12-18
现行
KS F 3507
석고 플라스터
石膏灰泥的标准规范
2023-12-29
现行
ASTM C1396/C1396M-24
Standard Specification for Gypsum Board
石膏板标准规范
2024-10-01
现行
ASTM C28/C28M-10(2020)
Standard Specification for Gypsum Plasters
石膏膏标准规格
2020-06-01
现行
ASTM C318/C318M-24
Standard Specification for Gypsum Formboard
石膏模板标准规范
2024-10-01
现行
ASTM C1047-19
Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
石膏墙板和石膏单板底座用附件的标准规范
2019-11-01
现行
ASTM C59/C59M-00(2020)
Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster
石膏铸造石膏和石膏成型石膏的标准规格
2020-10-01
现行
ASTM C587-24
Standard Specification for Gypsum Veneer Plaster
石膏单板灰泥标准规范
2024-10-01
现行
ASTM C61/C61M-00(2020)
Standard Specification for Gypsum Keene's Cement
石膏Keene水泥标准规范
2020-06-01
现行
ASTM C844-15(2021)
Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
铺设石膏饰面灰泥的石膏基层的应用标准规范
2021-06-01
现行
ASTM C1658/C1658M-19(2024)
Standard Specification for Glass Mat Gypsum Panels
玻璃垫石膏板的标准规范
2024-10-15
现行
ASTM C843-23
Standard Specification for Application of Gypsum Veneer Plaster
石膏贴面灰泥的应用标准规范
2023-03-01
现行
ASTM C514-04(2020)
Standard Specification for Nails for the Application of Gypsum Board
石膏板用钉子的标准规范
2020-04-01
现行
ASTM C842-05(2021)
Standard Specification for Application of Interior Gypsum Plaster
内部石膏石膏应用标准规范
2021-04-01
现行
ASTM C1278/C1278M-24
Standard Specification for Fiber-Reinforced Gypsum Panel
纤维增强石膏板的标准规范
2024-05-01
现行
ASTM C840-24
Standard Specification for Application and Finishing of Gypsum Board
石膏板应用和表面处理的标准规范
2024-11-01
现行
ASTM C1766-15(2019)
Standard Specification for Factory-Laminated Gypsum Panel Products
工厂层压石膏板产品标准规范
2019-10-01