Copper and copper alloys. Rod for free machining purposes
铜和铜合金 自由加工用杆

2016-07-31

Copper and copper alloys. Hollow rod for free machining purposes
铜和铜合金 自由加工用空心杆

2016-07-31

COPPER AND COPPER ALLOYS. HOLLOW ROD FOR FREE MACHINING PURPOSES.
铜和铜合金 用于自由加工的空心杆

1999-03-08

COPPER AND COPPER ALLOYS. ROD FOR GENERAL PURPOSES.
铜和铜合金 一般用途的杆

1999-02-03

Copper and copper alloys. Rod for general purposes
铜和铜合金 通用杆

2016-08-31

Copper and copper alloys - Rod for general purposes
铜和铜合金.一般用途杆

2016-11-01

COPPER ALLOY No. C18700 - Free Machining Copper
C18700号铜合金-易加工铜

1982-07-01

COPPER ALLOY No. 145 - Free Machining Copper
145号铜合金-易加工铜

1971-10-01

易切削铜合金棒
Free-cutting copper alloy rod and bar

2011-01-14

Copper and copper alloys. Copper rod, bar and wire for general electrical purposes
铜和铜合金 一般电气用铜棒、铜棒和铜线

2021-05-24

Copper and copper alloys - Copper rod, bar and wire for general electrical purposes
铜和铜合金.一般电气用铜棒、铜棒和铜线；德文版EN 13601:2021

2021-07-01

COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES.
铜和铜合金.一般电气用铜棒、铜棒和铜线

2003-02-21

CARPENTER NICKEL-COPPER ALLOY 405 - Free Machining Nickel Copper Alloy
CARPENTER镍铜合金405-易加工镍铜合金

1986-08-01

MUELLER ALLOY 1470 - Free Machining Copper
米勒合金1470-易加工铜

1972-11-01

电工用镉铜棒
Cadmium copper alloys rod and bar for electrical purpose

2016-04-05

BRUSH ALLOY M25 - Free Machining Beryllium Copper
电刷合金M25-易加工铍铜

1970-06-01

MUELLER ALLOY 1450 - Free Machining High Conductivity Copper
米勒合金1450-易加工高导电铜

1980-02-01

Nickel - Copper Alloy, Corrosion-Resistant, Bars, Forgings and Forging Stock, 67Ni - 30Cu - 0.04S, Free Machining
镍铜合金 耐腐蚀 棒材 锻件和锻件 67Ni-30Cu-0.04S 可自由加工

2024-12-05

Specification for hexagonal bars for nuts, couplings and hollow machined parts of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (free from peripheral and asymmetric coarse grain) (not less than 14 mm nor more than 36 mm across flats) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
铝-铜-镁-硅-锰合金（固溶处理和沉淀处理）螺母、联轴器和空心机加工零件用六角棒规范（无周边和不对称粗晶）（平面宽度不小于14 mm 也不大于36 mm）（Cu 4.4 Mg 0.5

1971-08-31