BS EN ISO 21029-2:2015规定了可运输真空绝缘材料的操作要求 设计用于在大气压力以上运行的体积不超过1000 l的低温容器。适当的零件可用作容器设计的指南，以便在大气中操作。对于设计用于个人医疗用途的低温容器，可适用其他要求。范围包括投入使用、灌装、提取、场内运输、储存、， 维护、定期检查和应急程序。对于通过公路、铁路、海运和空运运输这些船舶，其他额外要求 可以申请；具体规定中对其进行了定义。 体积不超过1000 l的可运输低温容器通常由 制造商，但可由另一方安装或重新安装，如运营商或业主。对于 因此，ISO 21029本部分的部分范围包括投入使用、检查、， 填充、维护和应急程序与ISO 21029-1重叠。交叉引用:ISO 21010ISO 23208ISO 21029-1Doc IGC 164/10CGA G-6.7购买本文件时提供的所有当前修订版均包含在购买本文件中。

BS EN ISO 21029-2:2015 specifies operational requirements for transportable vacuum insulated cryogenic vessels of not more than 1 000 l volume designed to operate above atmospheric pressure.Appropriate parts may be used as a guidance for a vessel design to operate open to the atmosphere.For cryogenic vessels designed for personal medical use, other requirements can apply.The scope includes putting into service, filling, withdrawal, transport within the location, storage, maintenance, periodic inspection, and emergency procedures.For the transportation of these vessels by public road, rail, sea, and air, other additional requirements can apply; these are defined in specific regulations.Transportable cryogenic vessels of not more than 1 000 l volume are often partly equipped by the manufacturer, but can be installed or re-installed by another party, such as the operator or owner. For this reason, some of the scope of this part of ISO 21029, which includes putting into service, inspection, filling, maintenance, and emergency procedure, overlaps with ISO 21029-1.Cross References:ISO 21010ISO 23208ISO 21029-1Doc IGC 164/10CGA G-6.7All current amendments available at time of purchase are included with the purchase of this document.