现行

DIN EN 13892-5

Methods of test for screed materials - Part 5: Determination of wear resistance to rolling wheel of screed material for wearing layer
熨平板材料的试验方法.第5部分:耐磨层熨平板材料滚动轮耐磨性的测定；德文版EN 13892-5:2003

2003-09-01

现行

UNE-EN 13892-5-2006

Methods of test for screed materials - Part 5: Determination of wear resistance to rolling wheel of screed material for wearing layer
熨平板材料的试验方法第5部分:耐磨层熨平板材料滚动轮耐磨性的测定

2006-03-29

现行

DIN EN 13892-4

Methods of test for screed materials - Part 4: Determination of wear resistance-BCA
熨平板材料的试验方法.第4部分:耐磨性BCA的测定；德文版EN 13892-4:2002

2003-02-01

现行

UNE-EN 13892-4-2003

Methods of test for screed materials - Part 4: Determination of wear resistance-BCA
熨平板材料的试验方法.第4部分:耐磨性BCA的测定

2003-06-27

现行

DIN EN 13892-7

Methods of test for screed materials - Part 7: Determination of wear resistance to rolling wheel of screed material with floor coverings
熨平板材料的试验方法.第7部分:带有地板覆盖物的熨平板材料滚动轮耐磨性的测定；德文版EN 13892-7:2003

2003-09-01

现行

UNE-EN 13892-7-2006

Methods of test for screed materials - Part 7: Determination of wear resistance to rolling wheel of screed material with floor coverings
熨平板材料的试验方法.第7部分:带有地板覆盖物的熨平板材料滚动轮耐磨性的测定

2006-03-29

现行

UNE 53985-3-2004

Plastics. Test method for polyurethane raw materials. Polyols. Part 3: Determination of basicity.
塑料 聚氨酯原材料的试验方法 多元醇 第3部分:碱度的测定

2004-03-18

现行

HB 5350.3-2004

熔模铸造模料性能试验方法 第3部分:抗弯强度的测定
Test method for properties of investment casting pattern materials-Part 3:Determination of bending strength

2004-09-01

现行

UNE-EN 2155-3-1994

AEROSPACE SERIES. TEST METHODS FOR TRANSPARENT MATERIALS FOR AIRCRAFT GLAZING. PART 3: DETERMINATION OF REFRACTIVE INDEX.
航空航天系列 飞机玻璃用透明材料的试验方法 第3部分:折射率的测定

1994-01-20

现行

JB/T 6237.3-2008

电触头材料用银粉化学分析方法 第3部分：邻菲罗啉分光光度法测定铁量
Test methods for chemical analysis of silver powder for electric contact material-Part 3:Determination of iron content

2008-03-12

现行

HB 7736.3-2004

复合材料预浸料物理性能试验方法 第3部分:纤维面密度的测定
Test method for physical properties of composite material prepreg Part 3:Determination of fiber mass per unit area

2004-02-16

现行

JB/T 7776.3-2008

银氧化镉电触头材料化学分析方法 第3部分：火焰原子吸收光谱法测定镍量
Test methods for chemical analysis of silver-cadmium oxide electric contact material-Part 3:Determination of nickel content

2008-03-12

现行

UNE 53984-3-1998

PLASTICS. TEST METHODS FOR POLYURETHANE RAW MATERIALS. PART 3: DETERMINATION OF THE ISOMER CONTENT IN MIXTURES OF 2,4- AND 2,6-TOLUENEDIISOCYANATE.
塑料 聚氨酯原材料的试验方法 第3部分:2,4-和2,6-甲苯二异氰酸酯混合物中异构体含量的测定

1998-05-07

现行

JB/T 7774.3-2008

银氧化锌电触头材料化学分析方法 第3部分：硫脲分光光度法测定铋量
Test methods for chemical analysis of silver-zine oxide electric contact material-Part 3:Determination of bismuth content

2008-02-01

现行

DIN EN 2155-3

Aerospace series; test methods for transparent materials for aircraft glazing; part 3: determination of refractive index; German version EN 2155-3:1993
航空航天系列；飞机玻璃用透明材料的试验方法；第3部分:折射率的测定；德文版EN 2155-3:1993

1993-04-01

现行

IEC 61340-2-3-2016 RLV

Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation
静电学.第2-3部分:测定用于避免静电电荷积聚的固体材料的电阻和电阻率的试验方法

2016-06-23

现行

IEC 61340-2-3-2016

Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation
静电学第2-3部分:确定用于避免静电电荷累积的固体材料的电阻和电阻率的测试方法

2016-06-23

现行

DIN 51045-3

Determination of linear thermal expansion of solids - Part 3: Testing of non-fired fine ceramic materials using the dilatometer method
固体线性热膨胀的测定.第3部分:用膨胀计法对非烧结细陶瓷材料的试验

2009-04-01

现行

JB/T 7778.3-2008

银碳化钨电触头材料化学分析方法 第3部分：气体容量法测定总碳量
Test methods for chemical analysis of siver-tungsten carbide electric contact material-Part 3:Determination of overall carbon content

2008-02-01

现行

KS C IEC 60811-1-3

전기 케이블 및 광케이블의 절연체 및 시스 재료의 공통 시험 방법 — 제1-3부:시험 방법 총칙 — 밀도 측정방법 —내수성 시험 — 수축 시험
电缆和光缆绝缘和护套材料的通用试验方法第1-3部分:一般应用 - 密度测定方法 - 吸水率试验 - 收缩率试验

2020-12-24