BS EN 14025:2018规定了金属结构设计和施工的最低要求 最大工作压力超过50 kPa（0.5 bar）的压力罐，用于运输 公路、铁路和海运的危险品。本文件包括开口和闭合的要求 以及结构设备;；它不包括服务设备的要求。为了坦克 低温液体的运输，EN 13530-1和EN 13530-2适用。根据本文件的范围，压力罐的设计和施工主要包括: 根据RID/ADR第6.8.2.1、6.8.3.1和6.8.5小节的相关要求。此外 RID/ADR表A第12列和第13列至第3章的相关要求。 2,4.3和 第6.8.2.4小节适用。对于结构设备RID/ADR，第6.8.2.2和6.8.3.2小节适用， 与此相关。参考第1.2.1小节中RID/ADR的定义。有关便携式储罐，请参见 RID/ADR，第4.2章，第6.7.2节和第6.7.2节。此外，RID/ADR的相关要求， 表A第3.2、4.2章第10列和第11列以及第6.7.2和6.7.3节适用。段落 上述数字与2017年版的RID/ADR有关，该版本将定期修订。这个可以 导致暂时不符合EN 14025。本文件适用于液化气体，包括液化石油气；但是，对于专用液化石油气标准 参见EN 12493。交叉引用:ISO 9606-2EN ISO 9606- ISO 15614-4 EN ISO 15614-1 ISO 15614-1 ISO 15614-4 4 4-4 4 4 4 4-4 4 4-4 4 4 4-4 4 4 4-4 4 4-1 ISO 15614-1 ISO 15614-1 ISO 15 15 15 6 9-1 ISO 1589-1 4 4-15 15 15 15 15 15 15 15 15 15 15 15 15-4 4-15 15 15 15 15 15 15 4-4 4 4-4 4 4 4 4 4-4 4 4 4 4 4 4-4 4 4 4 4 4 4 4 4 4-4 4 4 4 4 4 4 4 4 4 4 4-4 4 4 4 4 4 4 4-4-4 4 4 4-4 4 4 4 4 4 4 4 4 4 4-4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4-4 4 4 4 4 4 4 4 4 4 4 4 4 4-4-4 4 4 4 4 4 4 4 4 4-4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 ISO 15613ISO 1EN ISO 3834-2ISO 1496-3ISO 14732ISO 15609-4EN ISO 9606-2EN 12285-1:2003EN 14460:2006EN 10204EN ISO3452-1EN 1432EN 12493EN 10028-7EN 13530-2EN 1708-1EN 13530-1EN 14286ISO 3452-1购买本文件时提供的所有现行修订版均包含在购买本文件中。

BS EN 14025:2018 specifies the minimum requirements for the design and construction of metallic pressure tanks having a maximum working pressure exceeding 50 kPa (0,5 bar), for the transport of dangerous goods by road and rail and sea. This document includes requirements for openings, closures and structural equipment; it does not cover requirements of service equipment. For tanks for the transport of cryogenic liquids, EN 13530-1 and EN 13530-2 apply.Design and construction of pressure tanks according to the Scope of this document are primarily subject to the requirements of RID/ADR, Subsections 6.8.2.1, 6.8.3.1 and 6.8.5, as relevant. In addition, the relevant requirements of RID/ADR, Table A, columns 12 and 13, to Chapters 3.2, 4.3 and Subsection 6.8.2.4 apply. For the structural equipment RID/ADR, Subsections 6.8.2.2 and 6.8.3.2 apply, as relevant. The definitions of RID/ADR, Subsection 1.2.1, are referred to. For portable tanks see also RID/ADR, Chapter 4.2 and Sections 6.7.2 and 6.7.2. In addition, the relevant requirements of RID/ADR, Table A, Columns 10 and 11 to Chapters 3.2, 4.2, and Sections 6.7.2 and 6.7.3 apply. The paragraph numbers above relate to the 2017 issue of RID/ADR which are subject to regular revisions. This can lead to temporary non-compliances with EN 14025.This document is applicable to liquefied gases including LPG; however for a dedicated LPG standard see EN 12493.Cross References:ISO 9606-2EN ISO 9606-1ISO 15613EN 13445-3:2014EN 13094:2015EN ISO 15614-2EN 13445-4EN ISO 15609-1ISO 3834-2EN ISO 15614-1EN ISO 15609-4ISO 7005-1ISO 15609-3EN 13445-8EN ISO 15609-3ISO 3834-1ISO 15607EN ISO 14732EN 12972EN 1591-1ISO 15614-1EN ISO 15607ISO 15609-1EN ISO 15613ISO 9606-1EN 13445-2ISO 15614-2EN ISO 3834-1EN ISO 3834-2ISO 1496-3ISO 14732ISO 15609-4EN ISO 9606-2EN 12285-1:2003EN 14460:2006EN 10204EN ISO 3452-1EN 1432EN 12493EN 10028-7EN 13530-2EN 1708-1EN 13530-1EN 14286ISO 3452-1All current amendments available at time of purchase are included with the purchase of this document.