ISO 19062-1:2015建立了丙烯腈 - 丁二烯 - 苯乙烯（ABS）成型和挤出材料的名称系统，可用作规格的基础。 ABS塑料的类型通过基于指定性质的适当水平的分类系统彼此区分: a）维卡软化温度; b）熔体质量流量; c）夏比缺口冲击强度; d）拉伸模量; 以及关于组合物，预期应用和/或加工方法，重要性质，添加剂，着色剂，填料和增强材料的信息。 ISO 19062-1:2015适用于主要由苯乙烯（和/或烷基取代的苯乙烯）和丙烯腈的共聚物和主要以聚丁二烯为主要成分的分散的弹性相组成的连续相组成的所有丙烯腈 - 丁二烯 - 苯乙烯材料，组件，如文中规定的数量。 适用于未经改性或经着色剂，添加剂，填料等改性的粉末，颗粒，颗粒或碎屑形式的正常使用的ABS材料。 ISO 19062-1:2015不适用于材料 a）夏比缺口冲击强度小于3千焦/平方米， b）在弹性体中含有小于50质量％的丁二烯

ISO 19062-1:2015 establishes a system of designation for acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials, which may be used as the basis for specifications. The types of ABS plastic are differentiated from each other by a classification system based on appropriate levels of the designatory properties: a) Vicat softening temperature; b) melt mass-flow rate; c) Charpy notched impact strength; d) tensile modulus; and on information about composition, intended application and/or method of processing, important properties, additives, colorants, fillers, and reinforcing materials. ISO 19062-1:2015 is applicable to all acrylonitrile-butadiene-styrene materials consisting of a continuous phase based mainly on copolymers of styrene (and/or alkyl-substituted styrene) and acrylonitrile and a dispersed elastomeric phase based mainly on polybutadiene, plus other components, in such quantities as specified in the text. It applies to ABS materials ready for normal use in the form of powder, granules, pellets or chips, unmodified or modified by colorants, additives, fillers, etc. ISO 19062-1:2015 does not apply to materials a) with a Charpy notched impact strength of less than three kilojoules per square metre, b) containing less than 50 % by mass of butadiene in the elastomer of the elastomeric phase, and c) containing less than 15 % by mass of acrylonitrile in the continuous phase. It is not intended to imply that materials having the same designation give necessarily the same performance. This part of ISO 19062 does not provide engineering data, performance data, or data on processing conditions which may be required to specify a material for a particular application and/or method of processing. If such additional properties are required, they will be determined in accordance with the test methods specified in ISO 2580‑2, if suitable. In order to specify a thermoplastic material for a particular application or to ensure reproducible processing, additional requirements may be given in data block 5 (see 3.1).