IEC 61897:2020 RLV包含官方IEC国际标准及其红线版本。Redline版本不是官方文档，它只有英文版本，为您提供了一种快速简单的方法来比较IEC官方标准与其以前版本之间的所有变化。 IEC 61897:2020适用于用于单导体或地线或导体束的风振阻尼器，其中阻尼器直接连接到每个子导体。当指定不同于上述电缆的要求（例如，光学地线（OPGW）、全介质自支撑光缆（ADSS））时，买方可以采用本文件的部分内容。在某些情况下，测试程序和测试值由买方和供应商商定，并在采购合同中规定。附件A列出了买方和供应商之间需要商定的最低技术细节。在整个文件中，当测试适用于导体或地线的阻尼器时，使用“导体”一词。这第二版取消并取代了1998年出版的第一版。本版构成技术修订版。与上一版相比，此版本包括以下重大技术变更: a)除了Stockbridge型风振阻尼器之外，还考虑螺旋风振阻尼器和弹性体风振阻尼器。 b)考虑阻尼器在高温导体上的应用，在夹钳滑动试验中规定额外的高温试验。 c)简化阻尼器有效性评估程序。 d）对紧固件部件（如分离螺栓和锥形弹簧垫圈）进行低温试验。e)包括显示主要机械试验的试验布置的图。 关键词:架空线路,风振阻尼器

IEC 61897:2020 RLV contains both the official IEC International Standard and its Redline version. The Redline version is not an official document, it is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition.

IEC 61897:2020 applies to aeolian vibration dampers intended for single conductors or earth wires or conductor bundles where dampers are directly attached to each subconductor. The purchaser may adopt part(s) of this document when specifying requirements for cables different from those mentioned above (e.g. optical ground wires (OPGW), all dielectric self-supporting optical cables (ADSS)). In some cases, test procedures and test values are left to agreement between the purchaser and the supplier and are stated in the procurement contract. Annex A lists the minimum technical details to be agreed between purchaser and supplier. Throughout this document, the word “conductor” is used when the test applies to dampers for conductors or earth wires. This second edition cancels and replaces the first edition published in 1998. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) Consider, in addition to Stockbridge type aeolian vibration dampers, also spiral aeolian vibration dampers and elastomeric aeolian vibration dampers.
b) Consider the application of dampers on high temperature conductors, specifying additional high temperature tests in clamp slip tests.
c) Simplify the procedure of the damper effectiveness evaluation.
d) Introduce test at low temperature on fastener components such as break away bolts and conical spring washers.
e) Include figures showing the test arrangements for the main mechanical tests.
Key words: Overhead Lines, Aeolian Vibration Dampers