BS EN ISO 19085-5:2017给出了固定和可移动尺寸的安全要求和措施 锯子，以下简称“机器”，用于切割具有类似物理特性的木材和材料 木材的特性。注1:关于固定式和可移动式机器的定义，见ISO 19085-1:2017，3.4和3.5。它涉及第4条中列出的与以下各项有关的所有重大危险、危险情况和事件: 机器在预期条件下按照预期操作、调整和维护 包括可合理预见的误用。还有运输、组装、拆卸、， 禁用和报废阶段已被考虑在内。注2:有关相关但不显著的危险，例如机架的锐边，请参见ISO 12100。 它也适用于装有以下一个或多个装置/附加工作装置的机器 已处理危险的装置:主锯片和划线锯片升降装置；倾斜主锯片和划线锯片进行斜切的装置；记分装置；用宽度不超过20毫米的铣刀开槽的装置；可拆卸的供电装置；后成型边缘预切割单元；电动滑台；工件夹紧。注3:尺寸锯用于开槽、横切、尺寸标注和开槽。它不适用于在潜在爆炸性环境中使用的机器或机器 在其出版日期之前制造。交叉引用:IEC 60204-1:2005EN 847-1:2013ISO 19085- 1:2017ISO 4414:2010 CD-ROM Ed 3ISO 4413:2010 CD-ROM Ed 3ISO 7960:1995ISO 13849-1:2015ISO 13857:2008 Ed 1ISO 12100:2010 Ed 1ISO 13854:1996购买本文件时提供的所有当前修订版均包含在购买本文件中。

BS EN ISO 19085-5:2017 gives the safety requirements and measures for stationary and displaceable dimension saws, hereinafter referred to as "machines", designed to cut wood and material with similar physical characteristics to wood.NOTE 1 For the definitions of stationary and displaceable machines, see ISO 19085-1:2017, 3.4 and 3.5.It deals with all significant hazards, hazardous situations and events as listed in Clause 4, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account.NOTE 2 For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100.It is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:device for the main saw blade and scoring saw blade to be raised and lowered;device to tilt the main saw blade and scoring saw blade for angled cutting;device for scoring;device for grooving with milling tool with a width not exceeding 20 mm;demountable power feed unit;post-formed edge pre-cutting unit;power-operated sliding table;workpiece clamping.NOTE 3 Dimension saws are used for ripping, cross cutting, dimensioning and grooving.It is not applicable to machines intended for use in potentially explosive atmospheres or to machines manufactured prior to the date of its publication.Cross References:IEC 60204-1:2005EN 847-1:2013ISO 19085-1:2017ISO 4414:2010 CD-ROM Ed 3ISO 4413:2010 CD-ROM Ed 3ISO 7960:1995ISO 13849-1:2015ISO 13857:2008 Ed 1ISO 12100:2010 Ed 1ISO 13854:1996All current amendments available at time of purchase are included with the purchase of this document.