1.1这些试验方法包括生石灰和熟石灰以及ASTM标准中未涵盖的石灰石的物理试验。 注1:生石灰和熟石灰对水分和二氧化碳有很高的亲和力。在取样、储存和测试期间，应注意保护熟石灰和生石灰（见实施规程C 50）。 1.2测试程序按以下顺序出现: 部分 空气夹带 13 熟石灰、生石灰粉和石灰石的表观松密度 16 熟石灰、生石灰粉和石灰石的表观填充密度 17 熟石灰的高压釜膨胀 8. 石灰石粉的干亮度 15 喷气筛干法筛分 19 通过透气性测定生石灰和熟石灰粉的细度 18 石灰石可磨性 20 石灰石粉粒径 14 石灰腻子的可塑性 7. 熟石灰爆裂和点蚀 9 残渣和筛分分析 5. 熟石灰沉降率 11 生石灰消化率 12 熟石灰产品的比重 21 石灰腻子的标准稠度 6. 熟石灰的保水性 10 农业石灰材料的湿筛分析 22 1.3以国际单位制表示的数值应视为标准。 1.4 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。

1.1 These test methods cover physical testing of quicklime and hydrated lime, and of limestone not otherwise covered in ASTM standards. Note 1—Quicklime and hydrated lime have a high affinity for moisture and carbon dioxide. Caution should be taken to protect both hydrated and quicklime during sampling, storage, and testing (see Practice C 50). 1.2 The test procedures appear in the following order: Section Air Entrainment 13 Apparent Loose Density of Hydrated Lime, Pulverized Quicklime, and Limestone 16 Apparent Packed Density of Hydrated Lime, Pulverized Quicklime, and Limestone 17 Autoclave Expansion of Hydrated Lime 8 Dry Brightness of Pulverized Limestone 15 Dry Screening by Air Jet Sieve 19 Fineness of Pulverized Quicklime and Hydrated Lime by Air Permeability 18 Limestone Grindability 20 Particle Size of Pulverized Limestone 14 Plasticity of Lime Putty 7 Popping and Pitting of Hydrated Lime 9 Residue and Sieve Analysis 5 Settling Rate of Hydrated Lime 11 Slaking Rate of Quicklime 12 Specific Gravity of Hydrated Lime Products 21 Standard Consistency of Lime Putty 6 Water Retention of Hydrated Lime 10 Wet Sieve Analysis of Agricultural Liming Materials 22 1.3 The values stated in SI units are to be regarded as the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.