1.1 本性能规范涵盖了由任何纺织纤维或纤维混合物组成的机织织物，这些纤维或纤维的混合物将用于滑套。 1.2 这些要求适用于与织物方向相关的那些性能的长度和宽度方向。 1.3 本标准并不旨在解决与其使用相关的所有安全问题（如有）。本标准的使用者有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。 ====意义和用途====== 5.1 用于此最终用途的织物应满足中列出的所有要求 表1 . 5.2 应该认识到，织物可以用几乎无限数量的结构变量组合来生产（例如，纤维类型、纤维百分比、纱线捻度、纱线数量、经向和纬向计数、化学和机械整理）。 此外，时尚或美学规定，最终消费者可能会发现由不符合 表1 . 5.2.1 因此，没有单一的性能规范可能适用于可用于该最终用途的所有各种织物。 5.3 特定性能和测试方法的用途和重要性在规定测试方法的适当章节中进行了讨论。

1.1 This performance specification covers woven fabrics comprised of any textile fiber or mixture of fibers to be used in slipcovers. 1.2 These requirements apply to both the length and width directions for those properties where fabric direction is pertinent. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 Fabrics intended for this end-use should meet all of the requirements listed in Table 1 . 5.2 It should be recognized that fabrics can be produced with an almost infinite number of combination of construction variables (for example, type of fibers, percentage of fibers, yarn twist, yarn number, warp and pick count, chemical and mechanical finishes). Additionally, fashion or aesthetics dictate that the ultimate consumer may find acceptable articles made from fabrics that do not conform to all of the requirements in Table 1 . 5.2.1 Hence, no single performance specification can possibly apply to all the various fabrics that could be utilized for this end-use. 5.3 The uses and significance of particular properties and test methods are discussed in the appropriate sections of the specified test methods.